Issue link: https://onenorgren.uberflip.com/i/1528936
41 For further information, visit www.norgren.com and use the new improved search function. If you cannot see the option you require please contact us. 1 AC TUATORS F-SERIES PLUS Double Acting Ø 9/16" to 3" » Compact design » High quality components » Dependable service, and long life Technical Data Side Loading: Cylinders are specifically designed to push and pull. Side loading and misalignment of the piston rod should be avoided to ensure maximum operating performance and life. Materials: Cylinder Body: 304 Stainless Steel Head and Cap: Clear Anodized Aluminum Alloy Piston Rod: 303 Stainless Steel Rod Bearing: Oil Impregnated Bronze Piston: Aluminum Alloy Rod & Piston seals: Buna-N Medium: Filtered, lubricated or non-lubricated, compressed air Operating Pressure: 200 psig (13.6 Bar) Max. Temperature Range: Standard Nitrile seals- -40°F to 200°F (-40°C to 93°C) *With dew point of supply air less than air temperature below 35°F (2°C). Lubrication: All F-Series Plus cylinders are prelubricated at the time of assembly with a PTFE based grease, for non-lube service and long life. Example Model Number Cylinder Bore Ø Stroke inches Port Size Straight fitting 90° Swivel Elbow fitting Banjo flow control Tube O.D. FP056X0.250-BAM 9/16 1/4 10-32 UNF C24250410 C24470410 C2VA00410 1/4 FP075X0.500-BAM 3/4 1/2 10-32 UNF C24250410 C24470410 C2VA00410 1/4 FP106X0.750-BAM 1-1/16 3/4 1/8 NPT C24250418 C24470418 C2VA00418 1/4 FP150X1.000-BAM 1-1/2 1 1/8 NPT C24250418 C24470418 C2VA00418 1/4 FP200X1.250-BAM 2 1-1/4 1/8 NPT C24250418 C24470418 C2VA00418 1/4 FP250X1.500-BAM 2-1/2 1-1/2 1/4 NPT C24250418 C24470418 C2VA00418 1/4 FP300X1.750-BAM 3 1-3/4 1/4 NPT C24250628 C24470628 C2VA00628 3/8 Models Accessories FP 106 x 2.375 - PTM - PS Options selector Series Substitute Single Rod end FP Double Rod end FPD Spring Extend FPC Spring Retract FPR Bore Substitute 9/16" 056 3/4" 075 1-1/16" 106 1-1/2" 150 2" 200 2-1/2" 250 3" 300 Stroke Increments of 1/8" Mounting Options Substitute *Screw Clearance Holes Front SCF *Screw Clearance Holes Rear SCR *Screw Clearance Holes Both ends SCB Basic Model (std. c'bored mtg. holes) BAM **Front Trunnion TMF **Rear Trunnion TMR **Trunnion both ends TMB Pivot Mount PTM Threaded mounting holes Front THF Threaded mounting holes Rear THC Threaded mounting holes Both ends THB ***Nose Mount NMT Options Substitute Bumper both ends (not avail. with HT) 1 UB Bumper Head (not avail. with HT) 1 UH Bumper Cap (not avail. with HT) 1 UC Non-Standard Female Thread** FT(__) Heavy Duty Rear End Cap² HD Alternate Port Location PL(__) Low Friction Seals² LF Magnetic Piston² PS Switch Rail and Position (switches ordered separately) M1,M2, M3,M4 No Rod Thread PR Non-Standard Male Thread TM(__) Thread Extension over standard (specify additional length) 3 TX(__) Rod Extension over standard (specify additional length) 3 RX(__) Stainless Steel Fasteners (125 PSI Max) SF High Temperature Seals4 **HT Rod Wiper RW 1 Stroke is reduced by .03" per bumper. Bumpers are rated to 150°F 2 Overall length of cylinder may increase with this option. 3 Consult factory for negative thread or rod extensions. 4 Not available in single or reverse acting models. * Screw clearance to allow bolt head to pass through—no counter bores ** Not available on 9/16" bore *** Available in FP, FPC, and FPR. Includes a heavy duty end cap and rod wiper. Online at norgren.com