Issue link: https://onenorgren.uberflip.com/i/1528936
23 For further information, visit www.norgren.com and use the new improved search function. If you cannot see the option you require please contact us. 1 AC TUATORS » Conforms to ISO 15552 » High performance, adaptive cushioning system "ACS" » Extensive range of mountings ISOLINE ™ 15552 CYLINDER, DOUBLE ACTING DA/802000/M Ø 32 to 125 mm Technical Data Operating pressure: 15 to 232 psig (1 to 16 bar) Operating temperature: -4°F to +176°F (-20°C to +80°C ) max. Consult our Technical Service for use below +35°F (+2°C) Materials Barrel: anodized aluminum End covers: pressure diecast aluminum Piston rod: 303 stainless steel Piston rod seals: polyurethane Piston seals: polyurethane 'O'-rings: nitrile rubber Medium: Compressed air, filtered, lubricated or non-lubricated Standard: Conforms to ISO 15552 Operation: DA/802000/M double acting magnetic piston, adaptive cushioning A/8// Option selector Non- andard variants Sub itute Standard None Low temperature version -40°C (-40°F) (ø 32 ... 125 mm) -30°C (-22°F) (ø 160 ... 320 mm) L High temperature version -150°C max. (302°F) T Standard Sub itute Round barrel None Profile barrel P Pi on rod material Sub itute Stainless steel martensitic R Stainless steel austenitic S Hard chromium plated C Stainless steel austenitic & hard chromium plated D Cushioning Sub itute "ACS" (ø 32 ... 125 mm) 02 Standard (ø 160 ... 320 mm) None Cylinder ø (mm) Sub itute 032, 040, 050, 063, 080, 100, 125, 160, 200, 250, 320 Variants ø 32 ... 320 mm (magnetic pi on) Sub itute Standard M Special wiper/seal W2 Low friction X2 Piston rod bellow MG Without cushion MW Without cushion, low friction X4 Double ended piston rod JM Double ended piston rod, special wiper/seal W4 Four-positon cylinder MT Non-rotating piston rod (internal) N2 Extended piston rod MU **A/802***/MU/EX/****/*** Extension (mm) Extended piston rod, special wiper/seal W6 **A/802***/W6/EX/****/*** Extension (mm) Strokes (mm) Sub itute 5 ... 2800 Piston rod thread Sub itute Male None Female X Variants ø 160 ... 320 mm (without magnetic pi on) Sub itute Standard None Special wiper/seal W1 Low friction X1 Piston rod bellow G Without cushion W Without cushion, low friction X3 Double ended piston rod J Double ended piston rod, special wiper/seal W3 Four-positon cylinder IT Extended piston rod IU **A/8*****/IU/EX/****/*** Extension (mm) Extended piston rod, special wiper/seal W5 **A/8*****/W5/EX/****/*** Extension (mm) Note: If position is not required, disregard option position within part number e.g. RA/802100/M/EX/100. For combinations of cylinder variants consult our technical service. This option selector explains only the cylinder variants. Additional variants/options are not possible. Online at norgren.com