Issue link: https://onenorgren.uberflip.com/i/1528936
255 For further information, visit www.norgren.com and use the new improved search function. If you cannot see the option you require please contact us. 5 FIT TINGS PNEUFIT ® PUSH-IN FITTINGS Ø4 mm to 12 mm tube Metric Technical Data Fluid: Compressed air, nitrogen, inert and non-combustible gases compatible with materials of construction. For other types of fluids or compressed gases, please consult factory. Working Pressure: 750 mm Hg to 18 bar (29.5" Hg vacuum to 260 psig) Note: Flow Controls working pressures: .3 to 10 bar (5 to 150 psig) Working Temperature: -20°C to 80°C (0°F to 175°F) Request FPM option on selected part numbers for extended temperature range: -20°C to 180°C (0° to 350°F) Materials of Construction: Body, swivel fitting and collet: Nickel plated brass O-ring: Silicone free Nitrile Sealing washer (parallel male threads): Silicon free nitrile Tubing: Nylon 11 or Nylon 12, Polyurethane (95 durometer or above) and LDPE (Low Density Polyethylene). Note: Lower durometer polyurethane may be used, however, an internal tube support is required to prevent internal collapse of the tube wall. Thread Sealant: Precote 5 thread sealant is factory applied to the circumference of tapered male threads (ISO R). » Compact units featuring retained collets and positive tube anchorage. » Silicone free 'O'-ring seals. » Non-PTFE based thread sealant on all BSP taper threads. » Easy tube insertion for rapid assembly. » Internal hexagon on straight adaptors allows assembly in confined spaces. » Wide range of types available. » Reliable and corrosion resistant. Conversions Union (Inch tube to mm tube) Part number Tube O.D. inch Tube O.D. mm 120200200 5/32 4 120370406 1/4 6 120200500 5/16 8 120370610 3/8 10 120370712 1/2 12 Union Part number Tube O.D. 100200400 4 100200500 5 100200600 6 100200800 8 100201000 10 100201200 12 Bulkhead Union Part number Tube O.D. Metric thread Panel hole ø 100290400 4 M10 x 1.0 10.5 100290600 6 M14 x 1.0 10.5 100290800 8 M16 x 1.0 11.5 100291000 10 M18 x 1.0 13.0 100291200 12 M20 x 1.0 14.5 Union Tee Part number Tube O.D. 100600400 4 100600600 6 100600800 8 100601000 10 100601200 12 Part number Tube O.D. 100400400 4 100400600 6 100400800 8 1004001000 10 1004001200 12 Union Elbow ISO R Male Fixed Elbow Part number Tube O.D. ISO R thread 101450418 4 1/8 101450618 6 1/8 101450628 6 1/4 101450818 8 1/8 101450828 8 1/4 Union "Y" Part number Tube O.D. 120820200 4 120820500 8 ISO G Male Adapter All straight male connectors have an internal hex for the use of an Allen Wrench to allow the fitting to be mounted in any position. This also permits close porting not possible with a standard open end or socket wrench. Part number Tube O.D. ISO G or Metric thread 102250405 4 M5 x .8 102250418 4 1/8 102250428 4 1/4 102250605 6 M5 x .8 102250618 6 1/8 102250628 6 1/4 102250818 8 1/8 102250828 8 1/4 102251018 10 1/8 102251028 10 1/4 Pneufit ® ISO G Male Connector Online at norgren.com