Issue link: https://onenorgren.uberflip.com/i/1528936
226 For further information, visit www.norgren.com and use the new improved search function. If you cannot see the option you require please contact us. 4 AIR PREPARATION PRODUC TS GAUGES 18-015 1/8" and 1/4" NPTF DRIP LEG DRAIN 17-016 1/2" NPTF Technical Data » Automatically expels liquids from the piping network » Automatic drain valve opens when system is unpressurized, allowing water to escape by gravity » Automatic drain valve is float operated when system is pressurized » Install at low points and at far end of piping network Automatic drain connection: 1/8" pipe thread Automatic drain operating conditions (float operated): Bowl pressure required to close drain: Greater than 5 psig (0.3 bar) Minimum air flow thru drain required to close drain: 2 scfm (1 dm3/s). Bowl pressure required to open drain: Less than 3 psig (0.2 bar) Manual operation: Depress pin inside drain outlet to drain bowl NOTE: Flexible tube with 0.125" (3mm) minimum I.D. can be connected to the drain. Avoid restrictions in the tube. Materials Body: Zinc Bowl Transparent: Polycarbonate Metal: Zinc Drain mechanism: Acetal, Nitrile, stainless steel Metal bowl liquid level indicator lens: Pyrex Elastomers: CR Fluid: Compressed air Maximum pressure Transparent bowl: 150 psig (10 bar) Metal bowl: 250 psig (17 bar) Operating temperature* Transparent bowl: 0° to 125°F (-20° to 50°C) Metal bowl: 0° to 175°F (-20° to 80°C) * Air supply must be dry enough to avoid ice formation at temperatures below 35°F (2°C). » Monitor pressures in compressed air systems for optimum efficiency » Back or bottom connection 17-016 Series Model No. Port size Bowl type Bowl size Weight lbs (kg) 17-016-104 1/2" PTF Transparent 1/3 pint (0.16 liter) 0.8 (0.38) 17-016-107 1/2" PTF Metal with sight glass 1/3 pint (0.16 liter) 1.3 (0.59) Models Scale Range Connection and Face Diameter Outer scale psig Middle scale bar Inner scale Mpa 1/8" NPT 1.5" dia. 1/8" NPT 2" dia. 1/4" NPT 2" dia. R1/4 2" dia. 0 to 30 0 to 2 0 to 0.2 18-015-214 18-015-201 18-015-207 – 0 to 60 0 to 4 0 to 0.4 18-015-211 18-015-202 18-015-208 18-015-266 0 to 100 0 to 7 0 to 0.7 – 18-015-203 18-015-235 – 0 to 160 0 to 11 0 to 1.1 18-015-212 18-015-204 18-015-209 18-015-260 0 to 300 0 to 20 0 to 2.1 18-015-275 18-015-205 18-015-210 18-015-267 Center back connection ** Requires 1.63" (41 mm) diameter panel hole. Scale Range Connection & Face Diameter Outer scale psig Middle scale bar Inner scale Mpa 1/8 NPT male and 10-32 female 1.5" 0 to 30 0 to 2 0 to 0.2 5PG-406-000 ** 0 to 60 0 to 4 0 to 0.4 5PG-412-000 ** 0 to 100 0 to 7 0 to 0.7 5PG-420-000 ** Center back connection, panel mount Scale Range Connection and Face Diameter Outer scale bar Inner scale psig Inner scale Mpa 1/8" PTF 1.5" dia. 1/4" PTF 1.5" dia. 0 to 6 0 to 84 n/a – 18-015-913 0 to 10 0 to 140 n/a 18-015-844 18-015-909 Scale Range Connection and Face Diameter Outer scale psig Middle scale bar Inner scale Mpa 1/4" NPT 2.26" dia. 0 to 160 0 to 11 0 to 1.1 18-015-917 Stainless Steel, center back connection, panel mount Scale Range Connection and Face Diameter Outer scale psig Middle scale bar Inner scale Mpa 1/8" NPT 1.5" 1/4" NPT 2" 0 to 15 0 to 1 – – 18-015-082 0 to 30 0 to 2 0 to 0.2 18-015-224 18-015-030 * 0 to 60 0 to 4 0 to 0.4 18-015-225 18-015-083 * 0 to 100 0 to 7 0 to 0.7 18-015-265 18-015-084 * 0 to 160 0 to 11 0 to 1.1 18-015-273 18-015-085 * 0 to 300 0 to 20 – – 18-015-086 * 0 to 2000 0 to 135 – – 18-015-244 *† Bottom connection * Underwriters Laboratories Inc. Listed † Shipped with pulsation dampener installed.