Issue link: https://onenorgren.uberflip.com/i/1528936
220 For further information, visit www.norgren.com and use the new improved search function. If you cannot see the option you require please contact us. 4 AIR PREPARATION PRODUC TS PRESSURE REGULATOR WATER AND COMPRESSED AIR SERVICE 11-044 1/4" Tube connection Technical Data » Non-relieving models. » Acetal plastic, corrosion resistant construction » Low torque, non-rising adjusting knob. » Designed for use with deionized water and potable water systems. Plastic (not assembly) is NSF approved. All elastomers are CFR 21 FDA food and water contact compliant. Non-relieving models only Typical flow Compressed air service at 100 psig (7 bar) inlet pressure, 90 psig (6.3 bar) set pressure and a droop of 15 psig (1 bar) from set: 3.0 scfm (1.4 dm3/s) Typical flow Water service at 100 psig (7 bar) inlet pressure, 60 psig (4 bar) set pressure and a droop of 15 psig (1 bar) from set: 0.7 U.S. gpm (2.65 liters per minute) Materials Body: Acetal Bonnet: Acetal Valve: Stainless steel with EPDM seal (CFR21 FDA food and water contact compliant) Valve seat: Acetal Diaphragm: Stainless steel and nitrile (CFR21 FDA food and water contact compliant) Fluid: Water and compressed air Maximum pressure: 250 psig (17 bar) Operating temperature: Water service: 35° to 150°F (2° to 66°C) Air service: -30° to 150°F (-34° to 66°C)* *When used in air service, air supply must be dry enough to avoid ice formation at temperatures below 35°F (2°C). Port connections: 1/4" OD tube (brass nut and plastic ferrule supplied) Recommended tubing: 1/4" soft PVC or Polyethylene tubing. Avoid aluminum, copper, and hard plastic tubing. 11-044 Series Model No. Port Connection Outlet pressure adjustment range* psig Neck mounting bracket Mounting nut Repair kit 11-044-001 1/4" tube nut and ferrule 1 to 10 18-025-003 2962-89 3407-59 11-044-003 1/4" tube nut and ferrule 5 to 100 18-025-003 2962-89 3407-59 * Outlet pressure can be adjusted to pressures in excess, and less than, those specified. Do not use these units to control pressures outside of the specified ranges. ** Kit includes: Slip ring, valve seat, valve, valve seal, and diaphragm Models Accessories More info and CAD available online at: norgren.com