Issue link: https://onenorgren.uberflip.com/i/1528936
209 For further information, visit www.norgren.com and use the new improved search function. If you cannot see the option you require please contact us. 4 AIR PREPARATION PRODUC TS MAINLINE GENERAL PURPOSE Filters F18 1-1/2" PTF, 2" PTF MAINLINE GENERAL PURPOSE Filters F47 1-1/2" PTF, 2" PTF Technical Data Technical Data » Direct ported filter with high water removal efficiency » High flow with minimal pressure drop » Highly visible prismatic liquid level indicator lens » Port size: 1 1/2" & 2" (ISO G, PTF) » High efficiency oil and particle removal » Standard service life indicator turns from green to red when the filter element needs to be replaced Flow** Model SCFM F18 1400 ** Typical flow with a 40 µm element at 90 psig inlet pressure and 5 psig pressure drop. Materials Body: Aluminum Intermediate body: Aluminum Bowl: Aluminum Metal bowl liquid level indicator: Transparent nylon Filter element: Sintered bronze Elastomers: CR and nitrile Ambient/Media temperature: -30 ... 176 °F (-34 ... 80°C) Air supply must be dry enough to avoid ice formation at temperatures below 2°C (+35 °F). Note: Install an F18 filter with 5 μm filter element upstream of the F47 filter for maximum service life. Materials: Body, intermediate body and bowl: Aluminum Liquid level indicator: Transparent PA Element: Synthetic fiber & PU foam Elastomers: CR & NBR Internal parts: Acetal Spring: Stainless steel Elastomers: NBR Fluid: Compressed air Maximum pressure: 250 psig (17 bar) Operating temperature*: -30°F to 175°F (-34°C to 80°C) * Air supply must be dry enough to avoid ice formation at temperatures below 35°F (2°C). Particle removal: 40 µm filter element Medium: Compressed air only Max operating pressure: 250 psi (17 bar) Particle removal: 0.01 μm Remaining oil content: 0.01mg/m3 maximum Port size: 1 1/2" or 2" Drain: Automatic or manual Automatic drain operating conditions (float operated): Bowl pressure required to close drain: > 5 psi (0.35 bar) Bowl pressure required to open drain: ≤ 2.9 psi (0.2 bar) Minimum air flow required to close drain: 0.2 scfm (0.1 dm3/s) Manual operation: depress pin inside drain outlet to drain bowl. F18 Series Auto Drain Model No. F18 Series Manual Drain Model No. Port size PTF Element Service kit* F18-B00-A3DA F18-B00-M3DA 1-1/2" 5882-13 (40 μm) 5945-50 F18-C00-A3DA F18-C00-M3DA 2" 5882-13 (40 μm) 5945-50 * Kit includes: Seat and seal Models Accessories F47 Series Auto Drain Model No. Port size Element kit F47-B01-A0DA 1 1/2 3203-02 F47-C01-A0DA 2 3203-02 * Kit includes: Seat and seal Models Accessories More info and CAD available online at: norgren.com