206
For further information, visit www.norgren.com
and use the new improved search function. If you cannot see the option you require please contact us.
4
AIR
PREPARATION
PRODUC
TS
Technical Data
» High efficiency oil and
particle removal
» Standard service indicator turns
from green to red when the filter
element needs to be replaced
Automatic drain connection:
Will fit 1/8-27 and 1/8-28 male
pipe thread. - Flexible tube with
3/16" (5mm) minimum I.D. can be
connected to the automatic drain.
Drain may fail to operate if the
tube I.D. is less than 3/16" (5mm).
Avoid restrictions in the tube.
Flow**
Model SCFM
F46-601 90
F46-801 125
F46-A01 125
** Typical flow for oil-saturated element at
90 psig inlet pressure to maintain stated
oil removal performance.
Materials
Body: Aluminum
Bowl: Aluminum
Bowl sight glass: Pyrex
Elastomers: CR and nitrile
Filter element: Synthetic fiber
and white polyester
Fluid:
Compressed air
Maximum pressure:
250 psig (17 bar )
Operating temperature:*
-30°F to 150°F (-34°C to 65°C)
* Air supply must be dry enough to avoid ice
formation at temperatures below 35°F (2°C)
Particle removal:
Down to 0.01 µm
Maximum remaining oil content
in outlet air:
0.01ppm at 70°F (20°C) with an
inlet oil concentration of 12 ppm.
Nominal bowl size:
1 quart US (1 liter)
NOTE: Install an F17 filter with a 5 µm filter
element upstream of the F46 filter for
maximum service life.
MAINLINE GENERAL PURPOSE
Oil removal (Coalescing) filter F46 3/4" PTF, 1" PTF, 1-1/4" PTF
Models Accessories
F46 Series
Auto Drain
Model No.
Port
size
PTF
Wall mounting
bracket
Service Life
Indicator
Service kit*
F46-601-A0DA 3/4" 6212-50 5797-50 5351-04
F46-801-A0DA 1" 6212-50 5797-50 5351-04
F46-A01-A0DA 1-1/4" 6212-51 5797-50 5351-04
* Kit includes: Coalescing element, element O-ring, bowl O-ring, drain gasket
More info and CAD available online at:
norgren.com
