Issue link: https://onenorgren.uberflip.com/i/1528936
197 For further information, visit www.norgren.com and use the new improved search function. If you cannot see the option you require please contact us. 4 AIR PREPARATION PRODUC TS MINIATURE FILTER/REGULATOR-LUBRICATOR COMBINATION UNITS, 1/4" PTF Models Accessories PTH Series Manual Drain Model No. Auto Drain Model No. Port size PTF Gaugex Outlet pressure range psig Neck mounting bracket Sight feed dome Filter/ regulator service kit Lubricator service kit PTH-200-M1AA PTH-200-A1AA 1/4" included 5 to 100 18-025-003 4055-50 3820-12 3795-03 PTH-201-M1AA PTH-201-A1AA 1/4" not included 5 to 100 18-025-003 4055-50 3820-12 3795-03 * Outlet pressure can be adjusted to pressures in excess of, and less than, those specified. Do not use these units to control pressures outside of the specified ranges *Filter/regulator service kit contains slip ring, diaphragm, valve seat with o-ring, valve, valve spring, element, element gasket, and bowl o-ring **Lubricator service kit contains sight-feed dome seal, cartridge o-ring, and bowl o-ring. Technical Data » Compact design » Filter removes liquids and solid particles down to 5 µm » Push to lock adjusting knob » Micro-Fog lubricator provides air line lubrication to one or more air driven tools or other devices » Nearly constant oil density output with varying air flow Drain connection: 1/8" male pipe Filter/Regulator Particle removal: 5 µm Gauge ports: 1/8" PTF Lubricator Start point (i.e., minimum flow required for lubricator operation): 0.5 scfm (0.24 dm3/s) at 90 psig (6.3 bar) inlet pressure Nominal bowl capacity: 1 fluid ounce (31 ml) Materials: Bodies: Zinc Filter/Regulator bonnet: Acetal Filter/Regulator valve seat: Acetal Bowls: Polycarbonate Lubricator sight-feed dome: Transparent nylon Filter element: Sintered polypropylene Elastomers: Nitrile Fluid: Compressed air Maximum pressure: 150 psig (10 bar) Operating temperature*: 0°F to 125°F (-20°C to 50°C) * Air supply must be dry enough to avoid ice formation at temperatures below 35°F (2°C) Typical flow at 100 psig (7 bar) inlet pressure, 90 psig (6.3 bar) set pressure and a droop of 15 psig (1 bar) from set: 1/8" ports: 10 scfm (5 dm3/s) 1/4" ports: 14 scfm (7 dm3/s) More info and CAD available online at: norgren.com