Issue link: https://onenorgren.uberflip.com/i/1528936
177 For further information, visit www.norgren.com and use the new improved search function. If you cannot see the option you require please contact us. 4 AIR PREPARATION PRODUC TS EXCELON® PLUS MODULAR SYSTEM HB84G - Filter/regulator for extreme temperature applications Technical Data » Port size: 3/8" ... 3/4" (ISO G/PTF) » 5 or 40 micron particle and high efficiency water removal (> 98%) » Air purity classes in accordance to ISO8573-1:2010: 7:8:4 (40μm) 6:8:4 (5μm) » Salt Spray compliant to ISO 9227 Medium: Compressed air Maximum supply pressure: 20 bar (290 psi) Operating pressure ranges: 0.3 ...10 bar (4 ... 145 psi) 0.3 ... 4 bar (4 ... 58 psi) optional 0.7 ... 17 bar (2 ... 247 psi) optional Port size: G3/8, G1/2, G3/4, 3/8 PTF, 1/2 PTF, 3/4 PTF Filter element: 5 μm & 40 μm Gauge: Gauge port as standard (Rc 1/8 or 1/8 PTF) Integrated gauge as option Diaphragm Type: Relieving & Non-Relieving Drain: Manual or automatic Flow: 100 dm3/s at port size: 1/2", inlet pressure 10 bar (145 psi), 6.3 bar (91 psi) set pressure and a Δp: 1 bar (14.5 psi) drop from set Automatic drain operating conditions (float operated): Bowl pressure required to close drain: > 0.35 bar (5 psi) Bowl pressure required to open drain: ≤ 0.2 bar (2.9 psi) Minimum air flow required to close drain: 1 dm3/s (2 scfm) Ambient/Media temperature: Unit with gauge port without integrated gauge: -40 ... +80°C (-40 ... +176°F) Air supply must be dry enough to avoid ice formation at temperatures below +2°C (+35°F). Atex: Filter/regulators B84 are in conformity with Atex 2014/34/EU II 2 GD Ex h IIC T6 Gb EX h IIIC T85°C Db Materials: Body: Die cast aluminium Body covers: ABS (Magnum 3904) Bonnet: Die cast aluminium Filter element: sintered Polypropylene Valve: Brass and Low temperature Nitrile Metal Bowl: Die cast Aluminium Diaphragm: Low temperature Silicone, polyester reinforced Lower spring rest and diaphragm retainer: Aluminium Bowl O-ring:Low temp Nitrile Elastomers: Low temp Nitrile +80°C (+176°F) -40°C (-40°F) HB84G-HHT-HHH-HHH Option selector *1) Port size Sub itute 3/8" 3 1/2" 4 3/4" 6 Thread form Sub itute PTF A ISO G G Drain Sub itute Manual (standard) M Auto drain (standard) A Open ended ( with male thread adaptor) N*2) Gauge Sub itute Without integrated gauge but with gauge port 1/8" N With integrated gauge *4) G Pressure range *3) Sub itute 0.3 ... 4 bar F 0.3 ... 10 bar M 0.7 ...17 bar S Diaphragm Type Sub itute Relieving R Non-Relieving N Element Sub itute 5 µm 1 40 µm 3 Bowl Sub itute Metal with liquid indicator D Metal M *1) All models shown here are applicable for flow direction le to right. With flow direction right to le please use the online configurator www.norgren.com/air-preparation-configurator or contact Norgren *2) Available on request *3) Outlet pressure can be adjusted to pressures in excess of, and less than, those specified. Do not use these units to control pressures outside of the specified ranges. *4) Attention: With integrated gauge temperature range of the unit changes to -20°C ... +65°C Technical data HB84G - standard models with gauge port Rc1/8 (without gauge) Symbol Port size Drain Pressure range psi (bar) Filter element (µm) Bowl Weight lb (kg) Model *1) 3/8 Auto 4 to 145 (0.3 to 10) 40 Metal with level indicator 2.1 (0.95) HB84G-3AT-AD3-RMN 1/2 Auto 4 to 145 (0.3 to 10) 40 Metal with level indicator 2.1 (0.94) HB84G-4AT-AD3-RMN 3/4 Auto 4 to 145 (0.3 to 10) 40 Metal with level indicator 2.0 (0.92) HB84G-6AT-AD3-RMN 3/8 3/8 Manual 4 to 145 (0.3 to 10) 40 Metal with level indicator 2.1 (0.95) HB84G-3AT-MD3-RMN 1/2 Manual 4 to 145 (0.3 to 10) 40 Metal with level indicator 2.0 (0.93) HB84G-4AT-MD3-RMN 3/4 Manual 4 to 145 (0.3 to 10) 40 Metal with level indicator 2.0 (0.91) HB84G-6AT-MD3-RMN *1) All models shown here are supplied with gauge port applicable for flow direction le to right. With flow direction right to le please use the online configurator www.norgren.com/air-preparation-configurator or contact Norgren