155
For further information, visit www.norgren.com
and use the new improved search function. If you cannot see the option you require please contact us.
3
SWITCHES
AND
SENSORS
» For Heavy Duty Applications
with sensor tip radial
loads up to 50 lbs.
» For use in weld applications.
» Immune to weld fields and
resistant to weld slag.
» Can be used to detect
thread presence.
» Can be used as a locating pin.
» Minimum nut thickness is
5.0mm (.20") for M6 nut
» Maximum blank thickness
is 1.6mm (.06")
Sensor connector:
3-pin (male) 8mm (pico) connector
Operating temperature range:
32°F to 212°F (0°C to 100°C)
Target material:
Ferrous/Non-Ferrous
Technical Data
M6 Nut/Thread Detector System
M8 Nut/Thread Detector System
» For heavy duty applications
with sensor tip radial
loads up to 38 lbs.
» For use in weld applications
» Immune to weld fields and
resistant to weld slag.
» Can be used to detect
thread presence
» Minimum nut thickness is
6.5mm (.26") for M8 nut
» Maximum blank thickness
is 1.6mm (.06")
Sensor connector:
3-pin (male) 8mm (pico) connector
Operating temperature range:
32°F to 212°F (0°C to 100°C)
Target material:
Ferrous/Non-Ferrous
Technical Data
Sensor Monitor Cable Spring mount Weight
SNS08 SMH36008 (NPN) SCE13000 6 (2m) Straight SAB30403 0.033 lbs / 15 gm
SMH37008 (PNP) SCE13005 16 (5m) Straight
SCE13001 6 (2m) Angled
SCE13005RA 16 (5m) Angled
TOUGHENED NUT/THREAD SENSOR
SNS06
Sensor Monitor Cable Spring mount Weight
SNS06 SMH36006 (NPN) SCE13000 6 (2m) Straight SAB30403 0.037 lbs / 17 gm
SMH37006 (PNP) SCE13005 16 (5m) Straight
SCE13001 6 (2m) Angled
SCE13005RA 16 (5m) Angled
TOUGHENED NUT/THREAD SENSOR
SNS08
Online at
norgren.com
Online at
norgren.com
