Issue link: https://onenorgren.uberflip.com/i/1528936
07 For further information, visit www.norgren.com and use the new improved search function. If you cannot see the option you require please contact us. 1 AC TUATORS †Standard available for 11/2", 2", 2-1/2" bores, 12" max stroke. 12 lbs. force preload, 30 lbs. force compressed. Cushions not available on spring end. For other spring forces, bore sizes or longer strokes, consult factory. *Oversized ports may increase the overall length by 1/8", consult factory for impacted models. A, EA, J, and EJ Standard and special cylinder options Option Code, (alphabetical) Description A(–) Stroke adjustment single piston (specify adjustment length) AA(–) Stroke adjustment double piston (specify adjustment length) BL Removable piston rod stud (installed with removable adhesive sealant) HR Case hardened piston rod L(– –) Non-standard port location position 1 standard: L (Head Cap) (specify position 1 thru 4 for head and/or cap) LA Low friction cylinder (Pak-LapTM style seals) LE Rodlock LF Low friction cylinder (Nitrile compounded with PTFE rod and piston seals) (Not available with Ecology series) MS Metal scraper N(– –) Cushion adjust screw location position 2 standard:N(Head Cap) (specify position 1 thru 4 for head and/or cap) P(–)* Non-standard port sizes – [specify port size for P(–H) head only, P(–C) cap only, or P(–) both head & cap] PP Seals in cylinder O-ring loaded U-cups (rod and piston seals) – (A & J Only) PN Pinned piston and rod assembly PS Magnetic piston modification RS Studded male piston rod end RX(–) Piston rod extension over standard (specify additional "C" length) S 303/304 Stainless steel tie rods & nuts SB Stainless steel rod bushing nut SC† Single acting spring extend cap end of cylinder SL Steel cylinder tubing SR† Single acting spring retract rod end of cylinder SS 303 Stainless steel piston rod ST(–) Stop tube on rod end of cylinder: ST SV(– –) Stroke signal valve(s): SV (head cap) T(–) Non-standard piston rod thread (specify thread) TF(–) Piston rod thread depth over standard (Female) (specify additional "A" length) TS Stainless steel cylinder tubing TX(–) Piston rod thread extension over standard (Male) (specify additional "A" length) UB Head and cap bumpers (Adds 1/4" per bumper to overall length) V FPM seals in cylinder XI(–) Type #10 trunnion set dimension (MT4 model only) (customer must specify length) Option Code Description AP Air/Oil piston (piston supplied with O-ring hooded U-cup on cap end for air/oil operation) BB Cylinders mounted back to back EN* Electroless nickel plated cylinder H Piston rod seals O-ring loaded U-cups – (A & J Only) RB Rod boot over piston rod UA Unit-Air assembly (valve mounted to cylinder) UC Cap bumper (Adds 1/4" per bumper to overall length) UH Head bumper (Adds 1/4" per bumper to overall length) TK Thrust key plate mounting – [01 (MS4), 09 (MS2), and 15 (MS7) VM Valve mounting only Consult Factory for These Special Options: * When ordering "EN" option specify S, SS, TS options. NFPA ALUMINUM & STEEL CYLINDERS NFPA SERIES A ALUMINUM & J STEEL CYLINDERS, 1-1/2" TO 12" BORE SIZE