Norgren Collateral

Vacuum Product Guide 9 Spring Levelers - Level Compensators When handling sensitive objects such as fruit, Norgren Spring Levelers feature a soft touch allowing compliance for End-of-Arm tools to ensure that all cups make contact. This is especially important when handling large objects such as sheets of plywood that may be warped and the tool has multiple vacuum cups that must make contact. Norgren offers a large range of sizes and travel lengths 0.2" (5mm) to 3.6" (91mm) to accommodate the necessary over-driving by the lifting mechanism to bring all cups in contact. We offer large thru-bores that allow higher vacuum flow to overcome leakage and for rapid evacuation to ensure safe handling operations. The Series 3 Levelers have high performance bearings that prevent binding from side loading, provide a smooth operation over long strokes and prolong leveler life. Light Duty Spring Leveler Mounting Brackets Designed for flexible manufacturing operations, NSLBS and NSLBF Series mounting brackets attach to the top, sides or bottom of 1" (25mm) and 1.5" (40mm) extrusions. Easily mounted and adjusted, the Light Duty Spring Leveler Brackets readily rotate, slide or pivot for accurate part alignment. If the part size or process should change, you can reposition the brackets in a matter of seconds. Using your extrusions or ours, NSLBS and NSLBF Series mounting brackets connect to our NVSL Series Spring Levelers and a variety of our venturi vacuum generators to create a simple, off-the-shelf End-of-Arm device. Heavy Duty Spring Levelers/ Level Compensators Norgren's Spring Leveler design surpasses the competition. We offer large thru-bores that allow higher vacuum flow to overcome leakage and for rapid evacuation to ensure safe handling operations. Recommended for applications which require lifting heavy loads without deflection, Norgren Heavy Duty Spring Levelers include a rigid mounting bracket for a strong, solid connection to 1.5" (40mm) extrusions. Adjustable, Fixed Extension Shaft & Mounting Brackets Adjustable, Fixed Extension Shaft & Bracket is a rigid, non-moving rod that mounts to the top, sides or bottom of 1.5" (40mm) extrusions. Once the shaft is adjusted to meet a specific height requirement, the bracket is clamped into a fixed position. Designed for flexible manufacturing operations, the NFEB40 Series is easily repositioned by simply loosening 2 collar screws and sliding the shaft up or down to meet the new height requirements. For added adjustability, add an adjustable universal bracket to slide the NFEB40 left or right. Vacuum Cup Swivel Joint Handling curved surfaces is easy with Norgren's Vacuum Cup Swivel Joint. The NCSJ3 swivel joints attach to a spring leveler and vacuum cup providing a full 40º angular movement. To control the degree of swivel, simply tighten the collar nut located on top of the swivel joint to restrict movement. Developed in conjunction with Norgren spring levelers, the NCSJ3 swivel joint assemblies feature exceptionally large flow paths to safely handle porous objects.Depending on height and tooling requirements, Vacuum Cup Swivel Joints are interchangeable with the NVSL3, NSLB40-3, and NFEB40-3 Series spring levelers. Universal Mounting Brackets - Standard, Adjustable, Angled Compatible with 1" (25mm) and 1.5" (40mm) extrusions Universal Mounting Brackets are simple, lightweight connectors that attach Norgren vacuum generators, vacuum cups, spring levelers and manifold blocks to 1" or 1.5" extrusions. Available in 3 models, standard, adjustable or angled, our Universal Brackets are keyed to fit securely in 1/4" (6.5mm) or 5/16" (10mm) T-slots, remain square and increase holding force. Vacuum Cup Mount/ Manifold Block Norgren's combination Cup Mount/Manifold Blocks are compatible with 1" (25mm) and 1.5" (40mm) extrusions. Simplify your End-of-Arm tooling devices using our dual purpose MB Series - Vacuum Cup Mount/Manifold Block. Whether you are mounting vacuum cups to extrusions and/or distributing vacuum to multiple locations, the NMB Series streamlines your design with one multi-functional component. For design and plumbing flexibility, the NMB Series features five vacuum ports and three mounting options that easily connect vacuum generators and cups to 5/16" (10mm) or 1/4" (6.5mm) T-slot extrusions. Extra vacuum ports allow optional accessories to be directly mounted to the manifold block i.e. vacuum gauges or remotely plumbed such as vacuum switches, sensors or blow-off capabilities. High vacuum flow is critical for handling porous objects. Norgren offers up to 3/4" NPT ports to ensure high flow paths. Push-to- Connect Fittings Push-to- Connect (PTC) fittings are a robotic, End- of-Arm tooling component that connects all Norgren vacuum generators, cups, and spring levelers to each other or tubing. Norgren provides complete End-of-Arm tooling devices that can be ordered pre-assembled and tested at the factory or shipped in component format for on-site assembly. NSLBS (1, 2) / NSLBF (1, 2, 3) Series NCSJ3 Series 3 NSLB40 (2, 3) NVSL (1, 2, 3) Series NFEB40 (2,3) NUB, NUBA, and NAB brackets.

• Cover