Issue link: https://onenorgren.uberflip.com/i/1473472
05 For further information, visit www.norgren.com and use the new improved search function. If you cannot see the option you require please contact us. 1 AC TUATORS Series Substitute Series P Cylinder P Series P Double Rod End Cylinder DP Series EP Cylinder (Ecology seals) EP Series EP Double Rod End Cylinder (Ecology Seals) EDP Mount Substitute Universal (Standard – MS4 & SNC) 16 ‡ Head Rectangular Flange (MF1) 03 Cap Rectangular Flange (MF2) 04 Tie Rods Ext. Both Ends (MX1) 06 Tie Rods Ext. Cap End (MX2) 6C Tie Rods Ext. Head End (MX3) 6R (2) Tie Rods Ext. Both Ends (MX4) 6B Side Lugs (MS2) 09 Side End Angle (MS1) 11 Cap Clevis (MP1) 12 Cap Clevis (MP2) 22 Cap Eye (MP4) 42 Head Cushion Substitute No Cushion* 3 Adjustable Adaptive Cushion (Standard) 7 Cap Cushion Substitute No Cushion* 3 Adjustable Adaptive Cushion (Standard) 7 Rod Diameter Substitute 0.625" diameter rod (1.50", 2.00", 2.50" Bores) A 1.00" diameter rod (3.25", 4.00" Bores) B Options Back-to-Back cylinder configuration BB (**) Piston rod stud - Medium strength threadlocker BL Case Hardened Piston Rod HR Passive Rod Lock 1 LE Magnetic Piston (Standard/Required) PS Piston rod stud - High strength threadlocker RS Rod Extension (Specify additional length of rod) RX(_) 303 Stainless Steel Piston Rod (Hard Chrome Plated) SS Special Rod Thread (Specify thd. type) T(_) Thread Extension (Specify additional length of thd.) TX(_)*** Stroke Stroke in inches to three decimal places up to 100" Bore 1-1/2" Bore 1.50 2" Bore 2.00 2-1/2" Bore 2.50 3-1/4" Bore 3.25 4" Bore 4.00 Rod Thread Small Male – Solid (KK) (Standard) 1 Intermediate Male – Solid (CC) 2 Female (KK) 3 Full Thread Male – Solid (FF) 6 Plain Rod End – No Thread 7 Options Selector * Non cushioned cylinders are only available with Ecology Piston seals. Cushion seal will be removed. Note: It is recommended to use cushions for applications with operating speeds in excess of 20" per second. ** BB option must reference 2nd stroke. If mounting is selected, mount will be assembled with respect to the primary stroke. *** Thread extension in increments of 0.125" up to 2.00" max. EP 16 7 7 A 1-1.50X6.000-PS-RX(1.250) ‡ Universal mount cylinders include MS4 mounting holes and sleeve nut construction. Mounting kits should be ordered separately on Universal mount cylinders. *Insert cable length 2m, 5m, 10m Switch P/N Cable Material Type M/50/LSU/*V PVC Reed LED M/50/EAN/*V PVC Solid State Sinking (NPN) LED M/50/EAP/*V PVC Solid State Sourcing (PNP) LED M/50 switches* P-SERIES NFPA CYLINDER WITH PROFILE TUBE 1.50"– 4.00" Bores