Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifications given in this document. (2019 - 9261a) © 2015 IMI International s.r.o. en 3.6.001.032 06/22
1.85 (47)
M12x1
L
.47
(12)
.78
(20)
.70
(18)
.85
(21.5)
LED
M2.5
DIN form C Solenoid Connector with LED
Product Description Cable length (ft) M Model
3 Pin A-coded M12 1.97 (0.6) NC-DINCA-123MS-A
3 Pin A-coded M12 3.28 (1) NC-DINCA-123MS-1
3 Pin A-coded M12 6.56 (2) NC-DINCA-123MS-2
3 Pin A-coded M12 16.4 (5) NC-DINCA-123MS-5
Open End 3.28 (1) V10014-D01
Open End 9.84 (3) V10014-D03
Dimensions in inches (mm)
Projection/Fir angle
These products are intended for use in industrial compressed air systems
only. Do not use these products where pressures and temperatures can
exceed those listed under »Technical features/data«.
Before using these products with fluids other than those specified, for
non-industrial applications, life-support systems or other applications
not within published specifications, consult IMI Precision Engineering.
Through misuse, age, or malfunction, components used in fluid power
systems can fail in various modes.
The system designer is warned to consider the failure modes of all
component parts used in fluid power systems and to provide adequate
safeguards to prevent personal injury or damage to equipment in the
event of such failure.
System designers must provide a warning to end users in the system
instructional manual if protection against a failure mode cannot be
adequately provided.
System designers and end users are cautioned to review specific
warnings found in instruction sheets packed and shipped with these
products.
Warning
