Issue link: https://onenorgren.uberflip.com/i/1463811
239 ACC E S S O R I E S 8 For more information or for additional configurations, please contact us at NASInsideSales@imi-precision.com NC-MSR SERIES Threaded Cartridge Standard Models Part Number Max. Vacuum Level Max. Vacuum Flow Air Consumption NCM60H1-M07-MSR-M01 28.0 0.8 0.8 NCM60M1-M07-MSR-M01 20.0 0.5 0.5 NC060H1-M14-MSR-M01 28.0 0.8 0.8 NC060M1-M14-MSR-M01 20.0 0.5 0.5 NC090H1-M14-MSR-M01 28.0 1.2 1.8 NC090M1-M14-MSR-M01 20.0 1.4 1.4 NC150H1-M14-MSR-M01 28.0 3.2 4.8 NC150M1-M14-MSR-M01 20.0 3.5 2.8 NC200H1-M25-MSR-M01 28.0 5.4 7.8 NC200M1-M25-MSR-M01 20.0 6.0 4.8 NC250H1-M25-MSR-M01 28.0 9.0 12.5 NC250M1-M25-MSR-M01 20.0 9.5 7.8 NC300M1-M25-MSR-M01 20.0 20.0 12.5 NC350M1-M25-MSR-M01 20.0 28.0 22.0 NC HHHHH - MHH - MSR - M01 Option selector Series Substitute Mid., Max.(Metric) NC Vacuum Flow Substitute 0.5 SCFM (Min) M60 0.5 SCFM (Mid) 060 1.2 - 1.4 SCFM (Mid) 090 2.0 - 2.1 SCFM (Mid) 100 3.2 - 3.5 SCFM, 10 "Hg (Mid) 150 6.0 SCFM (Max - Short) 200 6.0 - 9.0 SCFM, (Max - Short) 250 20 SCFM, (Max - Long) 300 28 SCFM, (Max - Long) 350 Vacuum Level Substitute 10 "Hg, 80 PSI [5.5 bar] (Mid, Max) L1 20 "Hg, 80 PSI [5.5 bar] (Min, Mid, Max) M1 28 "Hg, 80 PSI [5.5 bar] (Min, Mid, Max) H1 10 "Hg, 60 PSI [4.0] (Mid, Max) X1 20 "Hg, 60 PSI [4.0] (Min, Mid, Max) Y1 28 "Hg, 60 PSI [4.0] (Min, Mid, Max) Z1 Material Substitute Anodized Aluminum M01 Mating Body Substitute MSV07 (Min) M07 MSV14 (Mid) M14 MSV25 (Max) M25 » Maintenance Free - straight through design allows debris to pass through without clogging » No downtime - screws dirctly into existing multi-stage generators » Efficient - minimal air consumption » Performance Optimization - precise control of vacuum and flow levels » Direct Replacement - no plumbing, no tools required, change in minutes Technical Data Recommended Supply Line M07 1/4" (6mm) OD M14 3/8" (10mm) OD M25 1/2" (12mm) OD Recommended Vacuum Port M07 1/8 NPTF (G1/8 F) M14 3/8 NPTF (G1/2 F) M25 1/2 NPTF (G1/2 F) Fluid Filtered (50 Micron) unlubricated, non-corrosive dry gases Operating Temperature -30° to ~250° F (-34° to ~121°C) Operating Pressure 80 PSI (5.5 bar) Standard or 60 PSI (4.1 bar) Materials Generator Body: Anodized Aluminum