Norgren Featured Datasheets
Issue link: https://onenorgren.uberflip.com/i/1463506
~11.8 (300) 1.22 (31) 1 3 5 6 4 7 1.22 (31) 1/8" PTF 1.44 (36.5) ~1.18 (30) 2 1.18 (30) 1.18 (30) 1.10 (28) 0.20 (5) 1.77 (45) 1 8 A /C 35 72 1.38 (35) 2.83 (72) 1.26 (32) 1.73 (44) 1.57 (40) 2.24 (57) 1.57 (40) G 1/2 1.14 (29) 1.14 (29) G 1/8 37 11.81 (300) ˷ 1.22 (31) 1.22 (31) 31 1 2 3 4 6 5 7 0.63 (16) 1.22 (31) 1.46 (37) us 8.200.250.010 Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. (2017 - 9216c) © 2020 Norgren Ltd 04/22 51D Pressure switch - digital 1 Switch OUT 1, green LED 2 Switch OUT 2, red LED 3 Dustproof protector 4 Connector M12 x 1 5 Inlet port 6 Alternative inlet port G1/8 plugged 7 Thread for mounting screw Dimensions in inches (mm) Projection/Third angle 18D Pressure switch 18D Porting block and 18D assembled Warning These products are intended for use in industrial compressed air systems only. Do not use these products where pressures and temperatures can exceed those listed under »Technical features/data«. Before using these products with fluids other than those specified, for non-industrial applications, life-support systems or other applications not within published specifications, consult IMI Precision Engineering, Norgren Ltd. Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. The system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided. System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products. EN - Englisch