Norgren Featured Datasheets
Issue link: https://onenorgren.uberflip.com/i/1461687
01/22 Factory Automation Technical features Technical data Switching Function: Normally closed Miniature Inline Filters Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. © 2022 Norgren Ltd > 25-micron element rating > Connections for 1/8" or 5/32" ID flexible tubing > Direct in-line mounting > Protection again particulate contamination for miniature pneumatic sy ems Medium: Compressed air, nitrogen or inert gases Maximum Pressure: 60 psig (4.1 bar) Maximum Temperature: 125° (52°C) Element rating: 25μm Materials: Body: Polypropylene Element: Sintered bronze Elastomers: Buna-N 6 psig bar .4 .3 .2 .1 0 4 2 0 PRESSURE DROP FLOW 0 0 .4 .2 .8 .4 1.2 .6 1.6 .8 2.0 scfm 1.0 dm 3 /s 4LF-010-000 FLUID: Air INLET PRESSURE: Noted – psig (bar) 10 (.69) 20 (1.38) 30 (2.07) 6 psig bar .4 .3 .2 .1 0 4 2 0 PRESSURE DROP FLOW 0 0 .4 .2 .8 .4 1.2 .6 1.6 .8 2.0 scfm 1.0 dm 3 /s 4LF-020-000 10 (.69) 20 (1.38) 30 (2.07) FLUID: Air INLET PRESSURE: Noted – psig (bar) Symbol Part Flexible Tube Number Connection 4LF-010-000 1/8" ID 4LF-020-000 5/32" ID A dia. C dia. B Part Number ØA B ØC 4LF-010-000 0.15 (3.8) 1.58 (40.1) 0.64 (16.3) 4LF-020-000 0.18 (4.6) 1.70 (43.2) 0.64 (16.3) Warning These products are intended for use in industrial compressed air systems only. Do not use these products where pressures and temperatures can exceed those listed under »Technical features/data«. Before using these products with fluids other than those specified, for non-industrial applications, life-support systems or other applications not within published specifications, consult IMI Precision Engineering, Norgren Ltd. Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. The system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided. System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products.