Issue link: https://onenorgren.uberflip.com/i/1435569
2.25 (57.1) 2.18 (55.4) Fig. 41_4 90 X 70 Code 1, 3, 5, 7, 9 or B Fig. 44_1 Code 2, 4, 6, 8, A or E Fig. 44_3 1.020" - 1.080" (25.9 - 27.4) Grip range with no pads Fig. 44_3 Fig. 45_2 Fig. 45_1 2.25 (57.1) 2.18 (55.4) Fig. 41_4 90 X 70 Code 1, 3, 5, 7, 9 or B Fig. 44_1 Code 2, 4, 6, 8, A or E Fig. 44_3 1.020" - 1.080" (25.9 - 27.4) Grip range with no pads Fig. 44_3 Fig. 45_2 Fig. 45_1 2.25 (57.1) 2.18 (55.4) Fig. 41_4 90 X 70 Code 1, 3, 5, 7, 9 or B Fig. 44_1 Code 2, 4, 6, 8, A or E Fig. 44_3 1.020" - 1.080" (25.9 - 27.4) Grip range with no pads Fig. 44_3 Fig. 45_2 Fig. 45_1 PGS10 & PGS11 90X90 JAW GRIPPER Diagram C: Gripper pads Notes: 1. Double point pads only available in 1.0" & 1.5" widths 2. Double point and rubber pads cannot be used with an indirect sensor 3. Rubber pads thickness range 0.5-2.5 mm 4. No pad code – NUL PGS1XR XX X X X XXX X Regular pads Double point pads Smooth pads Convex pads Rubber pads Angled pad orientation No pads (NUL) Material thickness & pad color Code Material thickness Pad color 0.50 - 2.0 mm 2 Black 1 2.01 - 3.5 mm 2 Silver 3 3.51 - 5.0 mm 1 Silver & 1 Gold 4 Pad width Code 0.5" / 12.7 mm S 1.0" / 25.4 mm M 1.50" / 38.1 mm D Material thickness & pad color Code Pad width Code Pad type Code Material thickness Pad color 0.50 - 2.5 mm 2 Rubber R 1.50" / 38.1 mm D Rubber R Toothed, angled pads Grip range with no pads 15°/30°/45° Angled smooth pads 15°/30°/45° Pad type Code Note Regular (0º) 0 Choose code based on angle pad orientation shown in lower le hand side of this page 15º Angle, toothed 1 or 2 30º Angle, toothed 3 or 4 45º Angle, toothed 5 or 6 15º Angle, smooth 9 or A Choose code based on angle pad orientation shown in lower le hand side of this page 30º Angle, smooth 7 or 8 45º Angle, smooth B or E Double point D Cannot be used with "S" pad width code Smooth S Cannot be used with "D" pad width code Convex C Needle Nose N Only "N" pad width code Transverse Convex, R1.65 T Cannot be used with "S" or "D" pad width code Transverse Convex, R.714 U Dimensions in inches (mm) are for reference only 45 P G S 10 & P G S 11 90 X 90 G R I P P E R 6 For more information or for additional configurations, please contact us at NASInsideSales@imi-precision.com Code 1, 3 or 5 (toothed) Code 9, 7 or B (smooth) Code 2, 4 or 6 (toothed) Code A, 8 or E (smooth)