Issue link: https://onenorgren.uberflip.com/i/1435569
33 P G S 10 & P G S 11 F L A N G E G R I P P E R 4 For more information or for additional configurations, please contact us at NASInsideSales@imi-precision.com PGS10 & PGS11 FLANGE JAW GRIPPER 1.020 - 1.080 (25.9 - 27.4) Regular pads Double point pads Smooth pads Convex pads Rubber pads Angled pad orientation No pads (NUL) Code 1 or 5 (toothed) Code 9 or B (smooth) Grip range with no pads Diagram C: Gripper pads Notes: 1. 30° & 45° angle pads only available in code 4 & 6 orientations 2. Double point pads only available in 1.0" & 1.5" widths 3. Double point and rubber pads cannot be used on indirect sensors 4. Rubber pads thickness range 0.5-2.5 mm 5. No pad code – NUL PGS1XF XX X X X XXX X Material thickness & pad color Code Material thickness Pad color 0.5 – 1.50 mm 2 Black 1 2.01 – 3.50 mm 2 Silver 3 3.51 – 5.00 mm 1 Silver & 1 Gold 4 0.5 – 1.50 mm 2 Black A 1.51 – 1.99 mm 1 Black & 1 Silver B 2.00 – 2.85 mm 2 Silver C 2.86 – 3.49 mm 1 Silver, 1 Gold, & 1 Shim D 3.50 – 4.00 mm 1 Silver & 1 Gold E Pad width Code 0.5" / 12.7 mm S 1.0" / 25.4 mm M 1.50" / 38.1 mm D Material thickness & pad color Code Pad width Code Pad type Code Material thickness Pad color 0.50 - 2.5 mm Black R 1.5" - 3.8 mm D Rubber R 0.50 - 2.5 mm Green R 0.5" / 12.7 mm S Rubber R Note: A-E for Double Blank Sensing Only Toothed, angled pads Pad type Code Note Regular (0º) 0 Choose code based on angle pad orientation shown in lower le hand side of this page 15º Angle, toothed 1 or 2 30º Angle, toothed 3 or 4 45º Angle, toothed 5 or 6 15º Angle, smooth 9 or A Choose code based on angle pad orientation shown in lower le hand side of this page 30º Angle, smooth 7 or 8 45º Angle, smooth B or E Double point D Cannot be used with "S" pad width code Smooth S Cannot be used with "D" pad width code Convex C Needle Nose N Only "N" pad width code Transverse Convex, R1.65 T Cannot be used with "S" or "D" pad width code Transverse Convex, R.714 U Code 2, 4 or 6 (toothed) Code A, 8 or E (smooth) 15°/30°/45° Angled smooth pads 15°/30°/45° Dimensions in inches (mm) are for reference only