Issue link: https://onenorgren.uberflip.com/i/1435569
1.020" - 1.080" (25.9 - 27.4) 18 P G S 10 & P G S 11 R E G U L A R G R I P P E R 2 For more information or for additional configurations, please contact us at NASInsideSales@imi-precision.com PGS10 & PGS11 REGULAR JAW GRIPPER Diagram C: Gripper pads Notes: 1. Double point pads only available in 1.0" & 1.5" widths 2. Double point and rubber pads cannot be used with an indirect sensor 3. Rubber pads thickness range 0.5-2.5 mm 4. No pad code – NUL PGS1XR XX X X X XXX X Regular pads Double point pads Smooth pads Convex pads Rubber pads Toothed, angled pads Angled pad orientation No pads (NUL) Code 1, 3 or 5 (toothed) Code 9, 7 or B (smooth) Material thickness & pad color Code Material thickness Pad color 0.50 - 2.0 mm 2 Black 1 2.01 - 3.5 mm 2 Silver 3 3.51 - 5.0 mm 1 Silver & 1 Gold 4 Pad width Code 0.31" / 8 mm N 0.5" / 12.7 mm S 1.0" / 25.4 mm M 1.50" / 38.1 mm D Material thickness & pad color Code Pad width Code Pad type Code Material thickness Pad color 0.50 - 2.5 mm Black R 1.50" / 38.1 mm D Rubber R 0.50 - 2.5 mm Green R 0.50" / 12.7 mm S Rubber R Pad type Code Note Regular (0º) 0 Choose code based on angle pad orientation shown in lower le hand side of this page 15º Angle, toothed 1 or 2 30º Angle, toothed 3 or 4 45º Angle, toothed 5 or 6 15º Angle, smooth 9 or A Choose code based on angle pad orientation shown in lower le hand side of this page 30º Angle, smooth 7 or 8 45º Angle, smooth B or E Double point D Cannot be used with "S" pad width code Smooth S Cannot be used with "D" pad width code Convex C Needle Nose N Only "N" pad width code Transverse Convex, R1.65 T Cannot be used with "S" or "D" pad width code Transverse Convex, R.714 U Grip range with no pads Code 2, 4 or 6 (toothed) Code A, 8 or E (smooth) Tranverse convex pads Needle Nose pads Fig. 18_1 Fig. Fig. 18_1 Fig. 18_2 15°/30°/45° Angled smooth pads 15°/30°/45° Dimensions in inches (mm) are for reference only