Issue link: https://onenorgren.uberflip.com/i/1435569
.47 (11.9) 1.70 (43.2) 4.5 + - .5 .0 (114-127) 1.61 (40.9) 1.00 (25.4) Allen nut (included with sensor) Schnorr Washer (included with sensor) Shim required for certain applications (included with sensor) Opposing pad Note 1 M5 SHCS (Included with sensor with opposing pad kit) Schnorr Washer (included with sensor with opposing pad kit) 1.00 (25.4) Allen nut (included with sensor) Schnorr Washer (included with sensor) Shim required for certain applications (included with sensor) Opposing pad Note 1 M5 SHCS (Included with sensor with opposing pad kit) Schnorr Washer (included with sensor with opposing pad kit) .62 (15.6) 1.70 (43.2) 9.8 + - .5 .0 (241-254) 1.61 (40.9) 1.21 (30.6) 3-Pin, 2-Key Male MICRO 1.21 (30.6) 3-Pin Male Pico 140+1_1 145+1_1 150 P G S 10 & P G S 11 S E N S O R S 13 For more information or for additional configurations, please contact us at NASInsideSales@imi-precision.com PGS10 SENSORS Dimensions in inches (mm) are for reference only In-pad Part Present sensor, PICO 3 Pin/M8 30º Standard Pad, Two Wire Output » Abrasion and impact resistant » Eliminates sensor position adjustments » Interface directly to PLC » Impervious to coolants and oils Part number (note 1) Description Material thickness (note 2) SGS40020P-30 Sensor Various SGS40020PKS-30 Sensor with opposing pad (Kit) 0.50-3.50 mm SGS40020PKG-30 Sensor with opposing pad (Kit) 2.01-5.00 mm Power/sensor connector: 3-pin 8 mm (pico type) male connector Supply voltage range: 24 VDC Maximum off-state leakage current: 1.3mA @ 24 VDC Maximum continuous load current: 40mA Operating temperature range: 0ºC (min) to 60ºC (max) Sensing range: 1.2 mm above gripper pad Response time: 25ms turn-on time, 60ms turn-off time Target material: Steel and aluminum Indicator LED: RED: On when target is detected; 360º visibility Short circuit protection: Yes: Automatically resets when short is removed Overload protection: Yes On-state voltage drop: 8.5 V Weight: 0.15 lbs (68 g) Note 1 - The standard sensor part number (without a KS or KG suffix) can be used with a chisel jaw or flange jaw gripper, or with a regular jaw gripper already fitted with an in- pad sensor. For new installation of an in-pad sensor on a regular jaw gripper, select the part numbers with a KS or KG suffix to include the opposing pad in your kit. Note 2 - Sensor must be ordered based on thickness of the material being handled. Pad thickness changes to ensure full jaw movement and cam lock action of gripper actuator. Order information Technical Data Spare parts 07750 – allen nut 07769 – shim S5 – Schnorr Washer