Issue link: https://onenorgren.uberflip.com/i/1435569
.60 (15.3) 1.70 (43.2) 1.61 (40.9) 4.5 + - .5 .0 (114-127) 1.00 (25.4) Allen nut (included with sensor) Schnorr Washer (included with sensor) Shim required for certain applications (included with sensor) Opposing pad Note 1 M5 SHCS (Included with sensor with opposing pad kit) Schnorr Washer (included with sensor with opposing pad kit) 1.00 (25.4) Allen nut (included with sensor) Schnorr Washer (included with sensor) Shim required for certain applications (included with sensor) Opposing pad Note 1 M5 SHCS (Included with sensor with opposing pad kit) Schnorr Washer (included with sensor with opposing pad kit) .60 (11.9) 1.70 (43.2) 4.5 + - .5 .0 (114-127) 1.61 (40.9) 1.21 (30.6) 4-Pin One Key Male MICRO 1.21 (30.6) 3-Pin, 2-Key Male MICRO Dimensions in inches (mm) are for reference only PGS10 SENSORS In-pad Part Present sensor, MICRO 3 Pin/2 Key 1/2-20 30º Smooth Pad, Two Wire Output » Abrasion and impact resistant » Eliminates sensor position adjustments » Interface directly to PLC » Impervious to coolants and oils Order information Part number (note 1) Description Material thickness (note 2) SGS40020-30-S Sensor Various SGS40020KS-30-S Sensor with opposing pad 0.50-3.50 mm SGS40020KG-30-S Sensor with opposing pad 2.01-5.00 mm Note 1 - The standard sensor part number (without a KS or KG suffix) can be used with a chisel jaw or flange jaw gripper, or with a regular jaw gripper already fitted with an in-pad sensor. For new installation of an in-pad sensor on a regular jaw gripper, select the part numbers with a KS or KG suffix to include the opposing pad in your kit. Note 2 - Sensor must be ordered based on thickness of the material being handled. Pad thickness changes to ensure full jaw movement and cam lock action of gripper actuator. Power/sensor connector: 3-pin 1/2-20unf (micro type), two key male connector Supply voltage range: 24 V AC/DC to 140 V AC/DC Maximum off-state leakage current: 1.3mA @ 120V Maximum continuous load current: 40mA Operating temperature range: 0ºC (min) to 60ºC (max) Sensing range: 1.2mm above gripper pad Response time: 25ms turn-on time, 25ms turn-off time. Target material: Steel and aluminum Indicator LED: RED: On when target is detected; 360º visibility Short circuit protection: Yes: Automatically resets when short is removed Overload protection: Yes On-state voltage drop: 8.5 V Weight: 0.15 lbs (70 g) Technical Data Spare parts 07750 – allen nut 07769 – shim S5 – Schnorr Washer 144 P G S 10 & P G S 11 S E N S O R S 13 For more information or for additional configurations, please contact us at NASInsideSales@imi-precision.com