Issue link: https://onenorgren.uberflip.com/i/1435569
21 P G S 10 & P G S 11 C H I S E L G R I P P E R 3 For more information or for additional configurations, please contact us at NASInsideSales@imi-precision.com PGS10 & PGS11 CHISEL JAW GRIPPER 1.44 (36.7) Flight height 0.75 (19.1) Throat depth 1.44 (36.7) Flight height 0.75 (19.1) Throat depth PGS1XX XX XXX XXX X PGS10 or PGS11 Chisel jaw (Diagram A) Jaw angle (Diagram B) Sensor type (Diagram C) Port orientation (Diagram E) Gripper pads (Diagram D) (A) Style jaws 1.0" Wide without teeth (B) Style jaws 0.50" Wide without teeth (C, D, E) Style jaws 1.0" Wide with teeth Throat depth 0.75" (19.1 mm) Flange height 1.44" (36.7 mm) Front face Hardened steel Jaw pads Hardened steel Body Hardcoat aluminum Lubrication Permanent for non-lube air Working pressure 60 psi min. - 100 psi max. (413 kPa min - 689 kPa max) Grip force *Up to 450 lb @ 80 psi (200 kg @ 551 kPa) Cycles MCBF 5 million Actuation time 0.05±0.01 sec close / <0.09 sec open Weight **1.6 lbs. (0.73 kg) Air ports 1/8" NPS or 1/8 Rc * Double sided force measurement **Weight is with air fittings and 1.0" wide pads and without sensors *Chisel jaw type based on material thickness PGS1XX XX XXX XXX X Material thickness Chisel jaw style Code 0.50 mm-9.50 mm 1.0" wide without teeth A 0.5" wide without teeth B Chisel jaw WITHOUT teeth Material thickness Chisel jaw style Code 0.50-3.50 mm 1.0" wide with teeth C 3.51-6.5 mm D 6.51-9.5 mm E 0.50-9.5 mm 0.5" wide with teeth G Chisel jaw WITH teeth Diagram A: Gripper jaw type & material thickness Technical Data (G) Style jaws 0.50" Wide with teeth Fig. 21_1 Dimensions in inches (mm) are for reference only Part number scheme