131
P
G
S
10
&
P
G
S
11
S
E
N
S
O
R
S
13
For more information or for additional configurations,
please contact us at NASInsideSales@imi-precision.com
PGS10 SENSORS
Dimensions in inches (mm) are for reference only
Indirect Sensors for Hot Metal Grippers
Double Blank and Part Present
» Easy calibration
» Abrasion and impact resistant
» Impervious to contamination from coolants and oils
» LED's for visual feedback
» Interface directly to programmable controllers
» Part numbers listed include attachment fasteners
Technical Data
1.65 (41.9)
7.6 (194)
2.19 (55.7)
.60 (15.2)
Calibration
Button
Red LED
M12x1, 4-Pin, 1-Key
Micro Connector
M8x1, 4-Pin
Pico Connector
M8x1,
Pico Connector
7.6 (194)
7.6 (194)
2.19 (55.7)
Calibration
Button
Red LED
M12x1, 4-Pin, 1-Key
Micro Connector
M8x1, 4-Pin
Pico Connector
M8x1, 3-Pin
Pico Connector
7.6 (194)
Power/sensor connector:
M12 MICRO 4-Pin, 1-Key
8 mm PICO 4-Pin
8 mm PICO 3-Pin
Part present sensor LED:
On for 1 sheet or more
Part present sensor output:
On for 1 sheet or more
Double blank sensor LED:
On for 1-sheet clamped
Blinking for more than 1 sheet
clamped
Double blank sensor outputs:
1-Sheet output: On for 1 sheet
2-Sheet output: On for 1 sheet
or closed
