Datasheets

Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. © 2020 Norgren Ltd 8/21 Warning: Cancer and reproductive harm — www.p65warnings.ca.gov. Warning These products are intended for use in industrial compressed air systems only. Do not use these products where pressures and temperatures can exceed those listed under »Technical features/data«. Before using these products with fluids other than those specified, for non-industrial applications, life-support systems or other applications not within published specifications, consult IMI Precision Engineering, Norgren Ltd. Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. The system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided. System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products. 0.91 (23) 1.53 (38.9) 0.12 (3) 1.60 (40.7) 0.22 (5.5) 0.36 (9.2) 2.28 (58) 1.65 (42) 2.20 (56) 1.18 (30) 1.34 (34) 0.22 (5.5) 0.36 (9.2) 0.30 (7.6) 0.79 (20) 1.73 (44) 0.89 (22.5) 0.21 (5.4) 0.26 (6.5) 1.18 (30) 1.18 (30) 1.50 (38) 0.20 (5.1) 0.94 (24) 1.57 (40) 1.97 (50) 0.21 (5.4) 2.52 (64) 0.21 (5.4) 0.79 (20) 1.57 (40) Mounting clamp 34D-BRKT-BODY Cover protection 34D-COVER-PROTEC 0.47 (12) 0.31 (8) 1.40 (35.6) G1/4 G1/4 0.75 (19) Adapter 34D-14G-G-ADPT 0.08 (2) 0.51 (13) 0.47 (12) 1.38 (35) G1/4 1/4-18NPT 0.75 (19) Adapter 34D-14G-NPT-ADPT Wall mounting kit 34D-BRKT-ANGLED Dimensions in inches (mm) Projection/First angle Label tag holder 34D-LABEL-TAG Throttle screw 34D-DAMPING-SCRW Adapter 34D-14G-NPT-FADP 0.60 (15) 1.03 (26) G1/4 O-RING SEAL 0.81 (20)

• Cover