5
GC3 Gripper
Loosen the four socket head set screws
located on each side of the gripper head
Rotate the gripper head to the desired
position. The head may be rotated a full
360 in either direction. Once positioned,
tighten the two set screws on the un-
marked faces to 55 in/lb [6.2 N/m].
Tighten the two set screws on the faces
stamped "2" to 55 in/lb [6.2 N/m].
o
This feature enables the end user to rotate the gripper head 360
o
around the center axis to perfectly
match the gripper alignment with the part contour. This is a standard feature for all Size 3 GC grippers
and is functional with all mounting options. Follow the steps below to rotate the gripper head.
Rotating Gripper Head
2
2
