Issue link: https://onenorgren.uberflip.com/i/1316293
24 GC4 Gripper Note: The example ordering string shown above is only for reference. Norgren highly recommends that users fully understand each GC4 option described in this technical guide before ordering a GC4 Series gripper. If you still have questions after reviewing this guide, please contact your local Norgren representative for additional information. (cylinder side). Right Left Order String Example. See note at bottom of page. When referring to the left side or right side of the gripper, look at it from the back Left Right Back A = P&F DC 4 PIN MICRO CONNECTOR (LEFT HAND SIDE) B = P&F DC 4 PIN MICRO CONNECTOR (RIGHT HAND SIDE) X = NO PROXIMITY SENSING PROXIMITY SENSING: X = NO OPTIONS AVAILABLE TIPS: 4 = 40mm BORE B = DOUBLE A = SINGLE X = NO TIPS TIP INSERTS: X = NO INSERTS A = CONVEX/CONCAVE B = CARBIDE B = CYLINDER WITH 1/8 NPT PORTS A = CYLINDER WITH 1/8 G PORTS X = NO CYLINDER CYLINDER: X = NO SPACER (ALLOWS INSERT ADJUSTMENT) 1 = 0.00mm -1.25mm PANEL THICKNESS 2 = 1.25mm-2.50mm PANEL THICKNESS 3 = 2.50mm-3.75mm PANEL THICKNESS TIP SPACERS: 4 = 1.5" ROD MOUNT 5 = 40mm ROD MOUNT 2 = 25mm ROD MOUNT 3 = REAR FLANGE MOUNT 1 = 1" ROD MOUNT X = NO MOUNT MOUNT TYPE: 6 = GL500 SERIES GRIPPER REAR FLANGE MOUNT D = P&F DC 4 PIN MICRO CONNECTOR (RIGHT HAND SIDE) C = P&F DC 4 PIN MICRO CONNECTOR (LEFT HAND SIDE) E = TURCK DC 4 PIN MICRO CONNECTOR (LEFT HAND SIDE) F = TURCK DC 4 PIN MICRO CONNECTOR (RIGHT HAND SIDE) H = TURCK AC/DC 5 PIN MICRO CONNECTOR (RIGHT HAND SIDE) G = TURCK AC/DC 5 PIN MICRO CONNECTOR (LEFT HAND SIDE) L = NAMCO AC/DC 5 PIN MICRO CONNECTOR (LEFT HAND SIDE) M = NAMCO AC/DC 5 PIN MICRO CONNECTOR (RIGHT HAND SIDE) K = NAMCO DC 4 PIN MICRO CONNECTOR (RIGHT HAND SIDE) J = NAMCO DC 4 PIN MICRO CONNECTOR (LEFT HAND SIDE) HEAD STYLE: G C 4 A 3 A 1 B 1 A 1 A GRIPPER SERIES DESIGNATOR GRIPPER SERIES BORE: JAW OPENING A1 = 45° JAW OPENING D1 = DROP AWAY, 22 1/2° UPPER, 80° LOWER A3 = 160° JAW OPENING A2 = 90° JAW OPENING U1 = FIXED UPPER, LOWER 22 1/2° JAW OPENING U2 = FIXED UPPER, LOWER 45° JAW OPENING U3 = FIXED UPPER, LOWER 80° JAW OPENING L3 = FIXED LOWER, UPPER 80° JAW OPENING L2 = FIXED LOWER, UPPER 45° JAW OPENING L1 = FIXED LOWER, UPPER 22 1/2° JAW OPENING C = CYLINDER WITH 1/8 BSPT PORTS 13 = EURO STYLE 30MM ROD MOUNT 14 = EURO STYLE CENTER FLANGE MOUNT 15 = EURO STYLE REAR FLANGE MOUNT WITH EJECTOR