Issue link: https://onenorgren.uberflip.com/i/1300828
56 P G S 11 ACC E S S O R I E S 7 For more information or for additional configurations, please contact us as NASInsideSales@imi-precision.com Dimensions in inches (mm) are for reference only PGS11 ACCESSORIES PGSGAGEFLGU45S PGSGAGEFLGU45A PGSGAGEFLGU70S PGSGAGEFLGU70A PGS10F70XXXXXXX 70º only PGSGAGECHSL14S PGSGAGECHSL14A PGS10CX1XXXXXXX 14º only After gripper releases part, rod allows part to be removed from gripper easily without catching pad. Part with flange being transferred Can be used to prevent parts from hanging up on the gripper when the part is released Allows parts to be straightened before gripper closes CORRECTED PART OUT OF PLACE PART Can be used to correct part orientation as gripper moves in 0.48 (12.3) 2.61 (66.4) Typical all for all gaging Part number Gripper Clamp plate material Weight lb (kg) PGSGAGE90D30LS Regular Steel 0.650 (0.29) PGSGAGE90D30LA Regular Aluminum 0.300 (0.14) PGSGAGECHSL14S Chisel Steel 0.670 (0.30) PGSGAGECHSL14A Chisel Aluminum 0.320 (0.14) PGSGAGEFLGU45S Flange Steel 0.680 (0.31) PGSGAGEFLGU45A Flange Aluminum 0.330 (0.15) PGSGAGEFLGU70S Flange Steel 0.680 (0.31) PGSGAGEFLGU70A Flange Aluminum 0.330 (0.15) » Used with PGS series grippers for easy part removal » Rods can be moved in several different positions » Rods can be custom made per customer specifications to stabilize parts during transfer » Can be used to position parts Order information Note: Gaging can be used with in-pad sensors. Gaging can NOT be used with indirect sensors. Application Part Gaging for PGS11 series grippers PGSGAGEXX PGSGAGEFLGU45S PGSGAGEFLGU45A PGSGAGEFLGU70S PGSGAGEFLGU70A PGS10F70XXXXXXX 70º only PGSGAGECHSL14S PGSGAGECHSL14A PGS10CX1XXXXXXX 14º only After gripper releases part, rod allows part to be removed from gripper easily without catching pad. Part with flange being transferred Can be used to prevent parts from hanging up on the gripper when the part is released Allows parts to be straightened before gripper closes CORRECTED PART OUT OF PLACE PART Can be used to correct part orientation as gripper moves in 0.48 (12.3) 2.61 (66.4) Typical all for all gaging Technical Data