37
P
G
S
11
S
H
OV
E
L
G
R
I
P
P
E
R
5
For more information or for additional configurations,
please contact us as NASInsideSales@imi-precision.com
Dimensions in inches (mm) are for reference only
PGS11 SHOVEL JAW GRIPPER
1.44 (36.7)
Flange height
0.75
(19.1)
Throat
depth
Top jaw
Bottom jaw
PGS11X XX XXX XXX X
Throat depth
0.75" (19.1 mm)
Flange height
1.45" (36.8 mm)
Front face
Hardened steel
Jaw pads
Hardened steel
Body
Hardcoat aluminum
Lubrication
Permanent for non-lube air
Working pressure
60 psi minimum -
100 psi maximum
(413 kPa minimum -
689 kPa maximum)
Grip force
*Up to 450 lb @ 80 psi
(200 kg @ 551 kPa)
Cycles
MCBF 5 million
Actuation time
0.05 ± 0.01 sec close /
<0.09 sec open
Weight
**1.67 lbs. (0.76 kg)
Air ports
1/8" NPS or 1/8 Rc
* Double sided force measurement
** Weight is with air fittings and
1.0" wide pads
Shovel jaw based on material thickness
(Diagram A)
Jaw angle (Diagram B)
Sensor type (Diagram C)
Port orientation (Diagram E)
Gripper pads (Diagram D)
Diagram A
Gripper jaw type &
material thickness
(S,
T, U) Style jaws
Shovel jaw with teeth
(V, W, Y) Style jaws
Shovel jaw without teeth
PGS11X XX XXX XXX X
Material thickness Code
6.51-8.0 mm 7
8.01- 9.5 mm 9
Material thickness Shovel jaw style Code
0.5-3.5 mm Without teeth V
3.51-6.5 mm Without teeth W
6.51-9.5 mm Without teeth Y
Shovel jaw WITHOUT teeth
Shovel jaw WITH teeth
Material thickness Shovel jaw style Code
0.5-3.5 mm With teeth S
3.51-6.5 mm With teeth T
6.51-9.5 mm With teeth U
Technical Data
