Issue link: https://onenorgren.uberflip.com/i/1300828
11 P G S 10 A N D P G S 11 CO M PA R I S O N 1 For more information or for additional configurations, please contact us as NASInsideSales@imi-precision.com For more information or for additional configurations, please contact us as NASInsideSales@imi-precision.com PGS10 VS PGS11 GRIPPERS Key differences between PGS10 and PGS11: » The PGS11 series offers the same exact features as the PGS10, but with a retro cylinder that is compatible to the legacy Syron LTG1010 gripper or non-Norgren branch clamps, studs, and telescopes. All other components internal and external are common between a PGS10 and PGS11, allowing most components and accessories to be interchangeable. » PGS10 cylinders are shorter and thus make a more compact gripper. » Options for accessories may be different between PGS10 and PGS11. See Table I for compatibility information. PGS11 X XX XXX XXX X Same jaw configurations as PGS10 Same jaw angles as PGS10 Same sensor options as PGS10 Same fitting and port thread options as PGS10 Same gripper pad configurations as PGS10 PGS11 part numbering uses the same selection as the PGS10 except for the first 2 digits in the part number where 11 replaces 10. PGS10 vs. PGS11 dimensions Note: The cylinder is different between the PGS 10 and PGS 11, but the rest of the gripper chassis is the same. 1.73 (43.8) 1.20 (30.5) .63 (15.9) 1.38 (34.9) 2.13 (54) 1.75 (44.5) Fits Syron LTG1010 clamps LLC2502 LLC2702 1.89 (48) fits non-Norgren Clamp .90 (22.9) Bolt pattern is identical to Syron LTG1010 Fits LKR1059 & LKR1059-01 telescopes Fits LKR1061 & LKR1077 stud mounts PGS10 PGS11 1.25 (31.8) .63 (15.9) 1.65 (41.8) 1.73 (43.8) 1.20 (30.5) .63 (15.9) 1.38 (34.9) 2.13 (54) 1.75 (44.5) Fits Syron LTG1010 clamps LLC2502 LLC2702 1.89 (48) fits non-Norgren Clamp .90 (22.9) Bolt pattern is identical to Syron LTG1010 Fits LKR1059 & LKR1059-01 telescopes Fits LKR1061 & LKR1077 stud mounts