22
P
G
S
11
C
H
I
S
E
L
G
R
I
P
P
E
R
3
For more information or for additional configurations,
please contact us as NASInsideSales@imi-precision.com
Dimensions in inches (mm) are for reference only
PGS11 CHISEL JAW GRIPPER
1.44
(36.7)
Flange
height
0.75
(19.1)
Throat
depth
1.44
(36.7)
Flange
height
0.75
(19.1)
Throat
depth
PGS11X XX XXX XXX X
Chisel jaw (Diagram A)*
Jaw angle (Diagram B)
Sensor type (Diagram C)
Port orientation (Diagram E)
Gripper pads (Diagram D)
Diagram A:
Gripper jaw type &
material thickness
(A) Style jaws
1.0" Wide without teeth
(B) Style jaws
0.50" Wide without teeth
(C, D, E) Style jaws
1.0" Wide with teeth
Throat depth
0.75" (19.1 mm)
Flange height
1.44" (36.7 mm)
Front face
Hardened steel
Jaw pads
Hardened steel
Body
Hardcoat aluminum
Lubrication
Permanent for non-lube air
Working pressure
60 psi minimum -
100 psi maximum
(413 kPa minimum -
689 kPa maximum)
Grip force
*Up to 450 lb @ 80 psi
(200 kg @ 551 kPa)
Cycles
MCBF 5 million
Actuation time
0.05±0.01 sec close /
<0.09 sec open
Weight
**1.6 lbs. (0.73 kg)
Air ports
1/8" NPS or 1/8 Rc
* Double sided force measurement
**Weight is with air fittings and 1.0" wide
pads and without sensors
*Chisel jaw type based on material thickness
PGS11X XX XXX XXX X
Material thickness Code
0.50-2.0 mm 1
2.01-3.50 mm 2
3.51-5.0 mm 4
5.01-6.5 mm 6
6.51-8.0 mm 7
8.01-9.5 mm 9
Material thickness Chisel jaw style Code
0.50 mm-9.50 mm
1.0" wide without teeth A
0.5" wide without teeth B
Chisel jaw WITHOUT teeth
Material thickness Code
0.50-3.50 mm C
3.51-6.5 mm D
6.51-9.5 mm E
Chisel jaw WITH teeth
Technical Data
