Issue link: https://onenorgren.uberflip.com/i/1300825
98 P G S 10 S E N S O R S 10 For more information or for additional configurations, please contact us as NASInsideSales@imi-precision.com Dimensions in inches (mm) are for reference only PGS10 SENSORS In-pad Part Present sensor, MICRO 3 Pin/2 Key 1/2-20 30º Standard Pad, Two Wire Output » Abrasion and impact resistant » Eliminates sensor position adjustments » LED for on/off status of sensor » Interface directly to PLC » Impervious to coolants and oils Order information Part number (note 1) Description Material thickness (note 2) SGS40020-30 Sensor Various SGS40020KS-30 Sensor with opposing pad 0.50-3.50 mm SGS40020KG-30 Sensor with opposing pad 2.01-5.00 mm Spare parts 07750 - allen nut 07769 - shim Note 1 - The standard sensor part number (without a KS or KG suffix) can be used with a chisel jaw or flange jaw gripper, or with a regular jaw gripper already fitted with an in-pad sensor. For new installation of an in-pad sensor on a regular jaw gripper, select the part numbers with a KS or KG suffix to include the opposing pad in your kit. Note 2 - Sensor must be ordered based on thickness of the material being handled. Pad thickness changes to ensure full jaw movement and cam lock action of gripper actuator. Power/sensor connector: 3-pin 1/2-20unf (micro type), two key male connector Supply voltage range: 24 V AC/DC to 140 V AC/DC Maximum off-state leakage current: 1.3mA @ 120V Maximum continuous load current: 40mA Operating temperature range: 0ºC (min) to 60ºC (max) Sensing range: 1.2 mm above gripper pad Response time: 25ms turn-on time, 25ms turn-off time Target material: Steel and aluminum Indicator light: RED: On when target is detected; 360º visibility Short circuit protection: Yes: Automatically resets when short is removed Overload protection: Yes On-state voltage drop: 8.5 V Weight: 0.15 lbs (70 g) 0.58 (14.7) 1.70 (43.2) 1.61 (40.9) 1.21 (30.6) 3-Pin 2-Key Male MICRO SGS40020-30 SHOWN WEIGHT: .15 lbs. [68 grams] 4.50 (114-127) +0.5 -0.0 Shim required for certain applications (included with sensor) Allen nut (included with sensor) 0.06 (1.5) thick 1.00 (25.4) Opposing pad Note 1 1.21 (30.6) 0.58 (14.7) 1.97 (50.0) 3-Pin 2-Key Male MICRO 4.5 (114-127) +0.5 -0.0 1.75 (44.5) Technical Data