Norgren Collateral

PGS10 Catalog

Issue link: https://onenorgren.uberflip.com/i/1300825

Contents of this Issue

Navigation

Page 13 of 107

14 P G S 10 R E G U L A R G R I P P E R 2 For more information or for additional configurations, please contact us as NASInsideSales@imi-precision.com PGS10 SERIES PART NUMBERING SCHEME XM0 XS0 XD0 XDX XMX XSX XDD RDR XMD 6 mm tube 1/8" Rc 1/8" Rc 8 mm tube 3/8" tube 1/8" NPT 1/8" NPT 1/4" tube XM0 XS0 XD0 XDX XMX XSX XDD RDR XMD 6 mm tube 1/8" Rc 1/8" Rc 8 mm tube 3/8" tube 1/8" NPT 1/8" NPT 1/4" tube PGS 10 X X X X X X X X X X Pressroom Gripper System 10 Series Jaw type: regular, chisel, flange, or shovel Top jaw open angle Bottom jaw open angle Air port orientation and fitting type Pad type Pad width Material thickness Connection and mounting preferences Sensor output Sensor type Jaw pads Flat pads for general purpose gripping. Angle pads for more challenging panels. Air fittings Air fittings can be ordered preassembled to the gripper. Special purpose pads Double point pads won't load up on galvanized panels Rubber pads won't leave scratches on panels. Body Hard coat aluminum Jaw pads Hardened steel Working pressure 60 psi min - 100 psi max (413 kPa min - 689 kPa min) Lubrication Permanent for non-lube air Grip force *Up to 450 lb @ 80 psi (200 kg @ 551 kPa) Cycles MCBF 5 million Actuation times 0.05±0.01 sec close / <0.09 sec open Weight **1.6 lbs (0.73 kg) Air ports 1/8" NPS or 1/8 Rc Front face Hardened steel * Double sided force measurement ** Weight is with air fittings and 1.0" wide pads General notes In-pad sensor cannot be used with: • 0.5" (12.7 mm) wide pads • Rubber pads • 15° or 45° angle pads Indirect sensors cannot be used with: • Rubber pads • Double point pads Part number scheme Technical Data

Articles in this issue

Links on this page

Archives of this issue

view archives of Norgren Collateral - PGS10 Catalog