Issue link: https://onenorgren.uberflip.com/i/1300825
103 P G S 10 S E N S O R S 10 For more information or for additional configurations, please contact us as NASInsideSales@imi-precision.com Dimensions in inches (mm) are for reference only PGS10 SENSORS In-pad Part Present sensor, PICO 3 Pin/M8 0º Standard Pad, Two Wire Output » Abrasion and impact resistant » Eliminates sensor position adjustments » Interface directly to PLC » Impervious to coolants and oils Part number (note 1) Description Material thickness (note 2) SGS40020P Sensor Various SGS40020PKS Sensor with opposing pad (Kit) 0.50-3.50 mm SGS40020PKG Sensor with opposing pad (Kit) 2.01-5.00 mm Spare parts 07750 - allen nut 07769 - shim Power/sensor connector: 3-pin 8 mm (pico type) male connector Supply voltage range: 24 VDC Maximum off-state leakage current: 1.3mA @ 24 VDC Maximum continuous load current: 40mA Operating temperature range: 0ºC (min) to 60ºC (max) Sensing range: 1.2 mm above gripper pad Response time: 25ms turn-on time, 60ms turn-off time Target material: Steel and aluminum Indicator light: RED: On when target is detected; 360º visibility Short circuit protection: Yes: Automatically resets when short is removed Overload protection: Yes On-state voltage drop: 8.5 V Weight: 0.15 lbs (68 g) Note 1 - The standard sensor part number (without a KS or KG suffix) can be used with a chisel jaw or flange jaw gripper, or with a regular jaw gripper already fitted with an in- pad sensor. For new installation of an in-pad sensor on a regular jaw gripper, select the part numbers with a KS or KG suffix to include the opposing pad in your kit. Note 2 - Sensor must be ordered based on thickness of the material being handled. Pad thickness changes to ensure full jaw movement and cam lock action of gripper actuator. (Included w/sensor) Allen nut. (Included w/sensor) 0.06 (1.5) thick 1.00 (25.4) Opposing pad Note 1 1.21 (30.6) 0.47 (11.9) 3-pin male pico 9.5 (241-254) +0.5 -0.0 1.75 (44.5) 1.97 (50.0) Shim req'd for certain applications Order information 0.47 (11.9) 1.70 (43.2) 9.5 " +0.5 / -0.0 (241-254 mm) 1.61 (40.9) 1.21 (30.6) 3-Pin Male Pico SGS40014P SHOWN WEIGHT: .15 lbs. [68 grams] 9.50 (241-254) +0.5 -0.0 Allen nut (included with sensor) 0.06 (1.5) thick 1.00 (25.4) Opposing pad Note 1 1.21 (30.6) 0.47 (11.9) 3-pin male pico 9.5 (241-254) +0.5 -0.0 1.75 (44.5) 1.97 (50.0) Shim required for certain applications (included with sensor) Technical Data