Datasheets

ACTUATORS 1 ACT-21 For further information www.norgren.com Roller bearings Composite bearings This product is for demonstration purposes only. Force Factor Data 1 Two bearings options: High load carrying composite bearings... 2 ...or high precision low friction recirculating ball bearings (roller bearings) 3 Composite bearing: 9/16" to 2.0" bore has stainless steel guide shafts 2-1/2" and 3.0" bore has chrome plated carbon steel guide shafts 4 Roller bearing: Case hardened steel guide shafts 5 Composite bearings, precision machined clear hard anodized aluminum body and tooling plate 6 Roller bearing, precision machined black anodized aluminum body 7 Composite bearings, clear hard anodized aluminum tooling plate 8 Roller bearings, black oxide steel tooling plate 9 Easily accessible oiler port on roller bearing model 10 RP Series Actuator with stainless steel tube aluminum end caps and chrome plated stainless steel piston rod. 11 Guide shaft wiper included on roller bearing model PS Magnetic piston option for position sensing with either Reed or Hall Effect switches. Optional ecology seal with non-adjustable cushion for the optimum in smooth, noise dampening deceleration of load at end of stroke. Shock absorbers optional to decelerate heavier loads or high speed applications Choice of high load composite or precision low friction bearings. A set of stroke adjusting collars come standard on the extend stroke of the roller bearing thruster. 10 3 1 5 7 4 11 2 9 6 8 Force Factor (Area) Bore Code Extend Retract 9/16" 056 0.25 0.2 3/4" 075 0.44 0.36 1-1/16" 106 0.89 0.69 1-1/2" 150 1.77 1.46 2.0" 200 3.14 2.70 2-1/2" 250 4.91 4.47 3.0" 300 7.07 6.47 Force Output Formula Cylinder Output Force= Force Factor(area) x Air Line Pressure Example: 1 1/16" Bore operating at 80psi Extend Force = .89 x 80 = 71.2lbs Retract Force = .69 x 80= 55.2 lbs *** = Stroke in inches * The following options, if in the model number of the thruster, must be added to the model number of the replacement cylinder part number above.: PS, NB, PC, UB Replacement Cylinder for (RT) Roundline Thruster Bore Model number 9/16" RP056X***-DAN-TX(0.063) - options* 3/4" RP075X***-DAN-SS-TX(0.125) - options* 1-1/16" RP106X***-DAN-SS-TX(0.250) - options* -NF 1-1/2" RP150X***-DAN-SS-TX(0.250) - options* 2" RP200X***-DAN-SS-TX(0.250) - options* 2-1/2" RP250X***-DAN-SS-TX(0.250) - options* 3" RP300X***-DAN-SS-TX(0.250) - options* Replacement Cylinder for (ERT) Ecology Roundline Thruster Bore Model number 9/16" N/A 3/4" ERP075X***-DAN-SS-TX(0.125) - options* 1-1/16" ERP106X***-DAN-SS-TX(0.250) - options* -NF 1-1/2" ERP150X***-DAN-SS-TX(0.250) - options* 2" ERP200X***-DAN-SS-TX(0.250) - options* 2-1/2" ERP250X***-DAN-SS-TX(0.250) - options* 3" ERP300X***-DAN-SS-TX(0.250) - options* RT Series Roundline Plus Thrusters 9/16" to 3" bore Composite and Roller Bearings

• Cover