Issue link: https://onenorgren.uberflip.com/i/1144099
21 F-PLUS EXPANDED RANGES For further information: (800) 514-0129 I sales.usa@imi-precision.com www.imi-precision.com WARNING: Cancer and Reproductive Harm – www.p65warnings.ca.gov HOW TO ORDER Options (Enter options in alphabetical order) B Bumpers 1 2 BH Bumpers Head End Only 1 2 BC Bumpers Cap End Only 1 2 J Failsafe Spring Return (CFD only) K Composite rod bushing 3 L2, L3, L4 Front port rotated to position 2, 3 or 4 LF Low friction seals LT Low Temperature (-40°F to 200°F) M1, M2, M3, M4 Magnet with track in position 1, 2, 3 or 4. Include "M" only once and each track location after that. For example, a cylinder with track in position 1 and 3 would have option M13 2 PR Non-threaded Rod R.XX Extra rod extension. Specify total additional rod extension in inches. For example, a cylinder with an extra extension of 1-1/2" would have option R1.5 SR Stainless Steel Rod TFC Coarse Female Thread TM Male Thread (fine) TMC Coarse Male Thread V High Temperature Seals (0°F to 400°F) 2 W Rod Wiper Z Rod Scraper Mounting Options (Enter options in alphabetical order) BM Standard Counterbored Holes PM PM - Pivot Mount PT Pivot Mount Rotated 90° TB Trunnion Both Ends TF Trunnion Front TR Trunnion Rear HB Threaded Holes Both Ends HF Threaded Holes Front HC Threaded Holes Rear CB Thru Holes Both Ends 1 CF Thru Holes Front 1 CR Thru Holes Rear 1 NM Nose Mount 2 CF075X1-BM«« Type Composite Body CF - Double Acting CFD - Double Acting, Double End Rod CFC - Spring Extend CFR - Spring Return Aluminum Body AF - Double Acting AFD - Double Acting, Double End Rod AFC - Spring Extend AFR - Spring Return Bore Size 106 1-1/16" 150 1-1/2" 200 2" 250 2-1/2" 300 3" 400 4" Stroke In inches and decimal fractions 1 "thru holes" are to allow bolt head to pass through, no counter bores 2 Not available on double rod end, includes wiper 1 No stroke reduction at 80psi or greater, at 0psi the stroke is reduced .040". Bumper compression is linear for 0psi to 80psi. Spring return models have rear bumper only, spring extend models have front bumper only 2 Bumpers and the piston magnet materials are rated to 200°F. Magnetic position sensing and bumper operation is not reliable above 200°F and options B and M should only be specificed with V for chemical compatability 3 FDA approved grease comes standard when option K is specified Composite and Aluminum Body 2