Norgren Collateral

z9305CT - Compact Cylinders

Catálogo Norgren Express México. Disponibilidad, Rapidez y Fiabilidad

Issue link: https://onenorgren.uberflip.com/i/1144099

Contents of this Issue

Navigation

Page 55 of 91

For further information: (800) 514-0129 I sales.usa@imi-precision.com www.imi-precision.com WARNING: Cancer and Reproductive Harm – www.p65warnings.ca.gov 56 EC AND GC CYLINDERS PRODUCT FEATURES EC Cylinder GC Cylinder Features and Benefits > PTFE-impregnated, hard anodized aluminum body provides superior wear resistance. Expected service life is 2500 kilometers. > Very compact; dimensionally-interchangeable with similar compact extruded aluminum body cylinders. > Very low profile, compact switch slides into groove within cylinder geometry. > EC cylinders are available in four models: double acting, single or double rod end; and single acting, spring return or extend, and GC cylinders are available in double acting, non-rotating. > GCD cylinders are available as a double acting, double ended, non-rotating rod cylinder to provide an additional operation feature from the cylinder rear. > Both models are available in ten bore sizes from 12mm to 100mm. > Wide variety of standard stroke lengths in 5mm increments; additional stroke lengths available. > Standard cylinder is completely metric in design; with Option -E, threaded mounting options, rod threads and ports are in U.S. customary units (inch). > Mounting options include threaded bottom mounting and threaded front/rear mounting option. > Options include bumpers, ports and threaded mounting option and rod threads in U.S. customary units, magnetic position sensing, and high temperature seals. > X option for GC and GCD cylinders only. This option increases stability by at least two times and up to 23 times depending on bore size. In addition, the X option more than doubles the maximum cylinder side load and moment! Anodized Aluminum Tooling Plate with High Strength Stainless Steel Fasteners Low Profile Switch Hard Chrome Plated Steel Guide Shafts; Composite Shaft Bearings PTFE-Impregnated, Hard Anodized Aluminum Body > Bronze Bushing (12-20mm); Self- lubricating Nylon (25-100mm) > Bronze Rod Guide (12-20mm); Anodized Aluminum (25-100mm) > Nitrile Rod Guide Seal > Nitrile Piston Seal > High Strength Aluminum Alloy Piston Not Pictured: Zinc Plated Carbon Steel Retaining Ring (303) Stainless Steel Rod Nitrile Rod Seal and Wiper The IMI Norgren ® EC/GC Series is a compact, aluminum-extruded body air cylinder designed for international machine requirements. The body is anodized in a special PTFE-impregnation process that provides superior wear characteristics. With its streamlined look, low cost and low-profile switch, it is an excellent choice for space-saving machine design. 3

Articles in this issue

Links on this page

Archives of this issue

view archives of Norgren Collateral - z9305CT - Compact Cylinders