Warning
These products are intended for use in industrial compressed air systems
only. Do not use these products where pressures and temperatures can
exceed those listed under »Technical
features/data«.
Before using these products with fluids other than those specified, for
non-industrial applications, life-support systems or other applications not
within published specifications, consult
IMI Precision Engineering, Norgren Ltd.
Through misuse, age, or malfunction, components used in fluid power
systems can fail in various modes. The system designer is warned to
consider the failure modes of all component parts used in fluid power
systems and to provide adequate safeguards to prevent personal injury
or damage to equipment in the event of such failure.
System designers must provide a warning to end users in the system
instructional manual if protection against a failure mode cannot be
adequately provided.
System designers and end users are cautioned to review specific warnings
found in instruction sheets packed and shipped with these products.
EN - Englisch
Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifications given in this document. © 2019 Norgren Ltd
520901600 1/16 0.625 1/4 0.646
520900400 1/4 1.313 7/16 1.408
520900600 3/8 1.618 11/16 1.682
Part Number 1,2,3,4 (Barb) A B Hex C D
Union Cross
52 Series Barb Fittings—Nickel Plated Brass
Tube range: 1/16" to 3/8" ID Tube
Dimensions
Union Cross
