Issue link: https://onenorgren.uberflip.com/i/1098673
42 Online at www.imi-precision.com 1 42 MAGNETICALLY COUPLED RODLESS CYLINDERS For further information visit www.imi-precision.com, and use the new, improved search function. If you are unable to find the option you require please call: (937) 833-4033. Bore A B C D E F 1-1/16" (106) 1.562 1/2-20 UNF 0.594 2.250 2.060 0.465 1-1/4" (125) 1.750 3/4-16 UNF 0.742 2.438 2.312 0.550 1-1/2" (150) 1.750 3/4-16 UNF 0.992 2.594 2.312 0.550 NOTE: Do not let the shock absorbers bottom out. The shock should not be used as a stroke adjuster. An optional stop collar is needed if stroke adjustment is required. Shock Absorber/Stroke Adjustment (in) (MCHL) Bumper Compression Bore Pressure 1-1/16" (106) 80 PSI 1-1/4" (125) 80 PSI 1-1/2" (150) 60 PSI Alternate Port (in) Bore G H 1-1/16" (106) 0.375 1/8 NPT 1-1/4" (125) 0.500 1/8 NPT 1-1/2" (150) 0.500 1/8 NPT The Bumper option does not add overall length to the cylinder. However, the unit will not go full stroke until the specified pressure in table above is applied to the cylinder. If full stroke is required at a pressure less than that specified above, the stroke adjustment option may be utilized in combination with the bumper option to obtain full stroke. Example: If 5 inches of stroke is required at 40 psi, order a 5.5 inch stroke unit with the Stroke Adjustment Option and adjust the stroke down to 5 inches. The base model magnetically coupled rodless high load guided offers both axial and alternate port locations. The base unit comes with flush surface plugs installed in the top ports of the End Blocks unless the "Y" option is specified. This no charge option has the plugs installed in the End Block side ports. Magnetically coupled rodless high load guided cylinders requiring shock absorbers with stop collars for stroke adjustment or a larger kinetic energy rating should use the following shock absorber. *The magnetically coupled rodless high load guided cylinder needs to be increased by the B dimension in order to maintain intended stroke length. The overall length increases by the same amount. The A dimension indicates maximum amount of stroke adjustment attainable. Bore Shock Absorber Model Stop Collar* Model 1-1/16" (106) MCHS-106 MCSC-106 1-1/4" (125) MCHS-150 MCSC-150 1-1/2" (150) MCHS-150 MCSC-150