Issue link: https://onenorgren.uberflip.com/i/1098673
36 Online at www.imi-precision.com 1 36 MAGNETICALLY COUPLED RODLESS CYLINDERS For further information visit www.imi-precision.com, and use the new, improved search function. If you are unable to find the option you require please call: (937) 833-4033. Bumpers (Internal & External): Urethane Stroke Adjuster Screw: Stainless steel Shock Absorbers: Anodized aluminum end plates, 303 stainless steel guide rods Bumper Plug: Anodized aluminum Stroke Adjuster Bumper Plate: Anodized aluminum Switch Track: Anodized aluminum Engineering Specifications (MCHL) Magnetic Coupling Strength (lbs) Lubrication Bore Size Strength 1-1/16" (106) 127 1-1/4" (125) 190 1-1/2" (150) 270 Weight (lbs) Bore Size Base Weight (0˚ Stroke) Adder per 1" 1-1/16" (106) 5.43 0.23 1-1/4" (125) 7.87 0.44 1-1/2" (150) 14.1 0.45 Option Adders for 1-1/16" A Option Adder 0.19 N/A A1 Option Adder 0.1 N/A A2 Option Adder 0.1 N/A B Option Adder 0.01 N/A Option Adders for 1-1/4" and 1-1/2" A Option Adder 2.67 N/A A1 Option Adder 1.33 N/A A2 Option Adder 1.33 N/A B Option Adder 0.01 N/A Operating Medium: Air or Hydraulic Pressure Rating: 100 PSI Temperature Range: 0˚ F to +170˚ F Breakaway: Less than 25 PSI Carriage: Anodized aluminum End Block: Anodized aluminum Guide Shaft: Case-hardened steel Base Plate: Anodized aluminum Guide Shaft Support: Anodized aluminum End Block Screws: Stainless steel Guide Shaft Screws: Black oxide carbon steel Carriage Retaining Rings: Plated carbon steel Body Wiper: Urethane Guide Shaft Bearing: Ball bearings in plastic housing Port Plug: Carbon steel Bearing Retaining Screw: Stainless steel Ratings All IMI Norgren magnetically coupled rodless high load guided cylinders are pre-lubricated internally and externally with our special bearing grade grease. The guide shafts are pre-lubricated with lightweight oil. The cylinder's life can be extended by providing additional lubrication with an air line mist lubricator and by lubricating the carriage every 100 miles with a high grade bearing grease. The guide shafts should be lubricated periodically with a lightweight oil. Do not over oil–there is an internal wick to retain the lightweight oil. Repairs IMI Norgren magnetically coupled rodless high load guided cylinders must be returned to the factory for repairs. Material of Construction Options