25
Online
at
www.imi-precision.com
1
25
MAGNETICALLY
COUPLED
RODLESS
CYLINDERS
For further information visit www.imi-precision.com, and
use the new, improved search function. If you are unable to
find the option you require please call: (937) 833-4033.
Improper mounting of the magnetically coupled rodless guided cylinder could result in binding and/or excess breakaway.
As a rule of thumb, the end blocks should be mounted flat with no more than 0.30˚ of differential misalignment end-to-end
(including both end blocks, i.e., 0.30˚ on one end block if other end block is square. If both end blocks are out of square, the
total between them cannot exceed 0.30˚. The x dimension represents how much displacement 0.30˚ represents using 0.0175"
per inch per degree of misalignment.)
Model S in (mm) x in (mm)
031 (5/16" Bore) 2.000 (50.8) 0.010 (0.25)
043 (7/16" Bore) 2.312 (58.7) 0.012 (0.30)
056 (9/16" Bore) 3.000 (76.2) 0.016 (0.40)
075 (3/4" Bore) 3.375 (85.7) 0.018 (0.46)
087 (7/8" Bore) 3.750 (95.3) 0.020 (0.51)
106 (1-1/16" Bore) 4.250 (108.0) 0.022 (0.56)
125 (1-1/4" Bore) 4.812 (122.2) 0.025 (0.64)
150 (1-1/2" Bore) 6.000 (152.4) 0.031 (0.79)
200 (2" Bore) 8.000 (203.2) 0.042 (1.07)
The following table shows the S dimension (End Block
width dimension as found in the catalog) for all bore sizes:
For example:
A Model 031 (5/16" Bore) has a S dimension of 2.00". 0.30˚ of misalignment would yield approximately
0.010" of differential misalignment from end-to-end before binding and/or excess breakaway would occur.
A Model 150 (1-1/2" Bore) has a S dimension of 6.00". 0.30˚ of misalignment would yield approximately
0.031" of differential misalignment from end-to-end before binding and/or excess breakaway would occur.
Bore A B D
9/16" (056) 1.000 .750 .1270/.1280 x .240/.260 DP.
3/4" (075) 1.375 .876 .1895/.1905 x .410/.430 DP.
1-1/16" (106) 1.750 1.250 .2520/.2530 x .410/.430 DP.
1-1/2" (150) 2.500 1.750 .3145/.3155 x .560/.580 DP.
Mounting Instructions (MC2S/MC3S)
Dowel Pin Hole Locations
