Issue link: https://onenorgren.uberflip.com/i/1085681
53 PA S S-T H R O U G H D O U B L E B L A N K D E T E C T I O N ( DY N A M I C ) 3 For more information or for additional configurations, please contact us at NASInsideSales@imi-precision.com Receiver Sensor Blank Transmit Sensor SENSOR HOUSING SENSOR GAP SENSOR HOUSING SENSOR GAP 57.2 mm (2.25") 71.6 mm (2.82") Threads M54 X 0.75-6g Transmit sensor 8 pin, 1 Key male micro 28 mm (1.125") minimum 50.8 mm (2.00") maximum Receiver sensor 5 pin, 1 Key male micro 65 mm (2.56") 36.1 mm (1.42") ø 54 mm (Ø 2.13") Receiver sensor 5 pin, 1 Key male micro Transmit sensor 8 pin, 1 Key male micro 28 mm (1.125") minimum 50.8 mm (2.00") maximum Pass Through Double Blank Analyzer Receiver Sensor Blank Transmit Sensor SENSOR HOUSING SENSOR GAP SENSOR HOUSING SENSOR GAP 57.2 mm (2.25") 71.6 mm (2.82") Threads M54 X 0.75-6g Transmit sensor 8 pin, 1 Key male micro 28 mm (1.125") minimum 50.8 mm (2.00") maximum Receiver sensor 5 pin, 1 Key male micro 65 mm (2.56") 36.1 mm (1.42") ø 54 mm (Ø 2.13") Receiver sensor 5 pin, 1 Key male micro Transmit sensor 8 pin, 1 Key male micro 28 mm (1.125") minimum 50.8 mm (2.00") maximum Pass Through Double Blank Analyzer Receiver Sensor Blank Transmit Sensor SENSOR HOUSING SENSOR GAP SENSOR HOUSING SENSOR GAP 57.2 mm (2.25") 71.6 mm (2.82") M54 X 0.75-6g Transmit sensor 8 pin, 1 Key male micro 28 mm (1.125") minimum 50.8 mm (2.00") maximum Receiver sensor 5 pin, 1 Key male micro 65 mm (2.56") 36.1 mm (1.42") ø 54 mm (Ø 2.13") Receiver sensor 5 pin, 1 Key male micro Transmit sensor 8 pin, 1 Key male micro 28 mm (1.125") minimum 50.8 mm (2.00") maximum Pass Through Double Blank Analyzer DOUBLE BLANK PASS THRU SENSORS DPS1054T / DPS1054R / DPS2054T / DPS2054R Part number Mount type DPS1054T Standard mount transmit sensor DPS1054R Standard mount receive sensor Measurement range (FE) Ferrous: 0.0-4.3 mm (NF) Non-ferrous: 0.0-3.0 mm Single blank thickness range* (FE) Ferrous: 0.5-3.3 mm (NF) Non-ferrous: 0.5-3.3 mm *When used as a Double Blank Analyzer » 304SS body with plastic face » End cap-galvanized steel or epoxy » Pressure spray resistant - Nema 4 or IP68 » Operating temperature 20ºC to 50ºC (68º to 122ºF) » Compatible with series DBP controller or series DPDN DeviceNet interface module Weight 490 g (1.1 lbs) Part number Mount type DPS2054T Low profile transmit sensor DPS2054R Low profile receive sensor Weight 305 g (0.67 lbs) Application Dimensions are for reference only Order information Technical Data Low Profile Sensors Order information Technical Data