Norgren Collateral

DBA Catalog

Issue link: https://onenorgren.uberflip.com/i/1085681

Contents of this Issue

Navigation

Page 32 of 55

33 CO N TAC T D O U B L E B L A N K D E T E C T I O N (S TAT I C ) 2 For more information or for additional configurations, please contact us at NASInsideSales@imi-precision.com DBA SPRING MOUNTS » All sensor cable connections at the DBA controller and one side of the sensor junction box use threaded connectors » All sensor cables have a threaded connector on one end » We recommend the use of ratchet type connectors on the sensor because of its superior resistance to vibration » We recommend the use of a short extension cable to the sensor. The extension cable improves the serviceability of the DBA System as shown in the example below Sensor Spring Mounts DSM3600 Standard Spring mount for 36 mm sensor DSM3601 Standard Spring mount for 42 mm sensor DSM3602 Standard Spring mount for 54 mm sensor DSM3603 Standard Spring mount for 75 mm sensor DSM3611 Extended travel Spring mount for 42 mm sensor DSM3623 Extended travel Spring mount for 54 mm sensor Sensor Spring Mounts Spring Mounts with Air Cylinder CAUTION: Contact type sensors must come in contact with the blank to take a measurement. Air gaps up to .003 inch are acceptable, if this gap stays consistent from measurement cycle to measurement cycle. Sensor bumpers and vacuum cups can interfere with the sensor face contact with the blank. Failure to install and adjust properly can result in double sheets not being detected. Note: The maximum single blank thickness rating of the DBA sensor must be lowered to 85% of its normal rating if bumpers or vacuum cups are mounted on the sensor. Part number Sensor Diameter Sensor Output Profile DSM3607 42mm N/A Low DSM3607-N 42mm NPN Low DSM3607-P 42mm PNP Low DSM3608 54mm N/A Low DSM3608-N 54mm NPN Low DSM3608-P 54mm PNP Low DSM3609 75mm N/A Low DSM3609-N 75mm NPN Low DSM3609-P 75mm PNP Low Part number Sensor Diameter Sensor Output Profile DSM3604 42mm N/A Extended DSM3604-N 42mm NPN Extended DSM3604-P 42mm PNP Extended DSM3605 54mm N/A Extended DSM3605-N 54mm NPN Extended DSM3605-P 54mm PNP Extended DSM3606 75mm N/A Extended DSM3606-N 75mm NPN Extended DSM3606-P 75mm PNP Extended 7.0 (179) 2.0 (51) 0.38 (9.652) Dimensions are for reference only 0.38 (9.6) 8.32 (211.3) 13.39 (340.1)

Articles in this issue

Links on this page

Archives of this issue

view archives of Norgren Collateral - DBA Catalog