Excelon® Plus Air Preparation 13
Control Valve
So start dump valves allow downstream
pressure to gradually increase on initial start
up, before fully opening to deliver line pressure.
The dump function allows the system to be
exhausted quickly when required, particularly in
the event of a power failure or emergency stop.
Product Highlights:
» Increased flow performance
» Lighter and smaller
» In-line or modular installation with Excelon®
and Excelon® Plus range (Stand alone or
can sit within FRL set on your machine)
» Variable Snap Adjustment
on Soft Start option
» Low wattage
» High flow dump facility (Fast Exhausting)
Technical Specifications
» Port size 1/4", 3/8", 1/2" and 3/4"
(PTF / ISO G)
» Two valve function options
• 3/2 Dump
• 3/2 Soft Start Dump
» Optional connectors: DIN plug, M12, Flying
lead or LEG, all to IP65 standards
» 15mm solenoid. Flat pin layout to
DIN43650 Form C (8mm), 2 pin & earth
» Available in 24V DC, 110V AC and 220V AC
» Exhaust flow capacity (cv) ranges from
> 1.27 to > 5.6 depending on option
15mm solenoid.
Flat pin layout to
DIN43650 Form C
(8mm), 2 pin & earth
Full flow threaded
exhaust port
Easy access to
adjustable snap
Adding to the comprehensive range of manual control valves, the electrically operated
control valves are available in two functions and two body sizes, four port sizes and three
voltages. Ideal for every application, their use can assist machine designers in complying
with the European Machineries Directive.
