Issue link: https://onenorgren.uberflip.com/i/561452
4 AIR PREPARATION PRODUCTS APP-124 For further information www.norgren.com * Approximate flow with 1000 psig (69 bar) inlet pressure, 60 psig (4 bar) set pressure and a 5 psig (0.35 bar) droop from set. † Outlet pressure can be adjusted to pressures in excess of, and less than, those specified. Do not use these units to control pressures outside of the specified ranges. R44 R83 Underwriters Laboratories, Inc. listed (file number SA1089) for use with air, argon, carbon dioxide, krypton, neon, nitrogen, xenon. For use with other gases, including oxygen, consult factory. Non-relieving and relieving models. Relieving models allow reduction of outlet pressure even when the system is dead-ended Ordering information Models listed have PTF threads, and relieving diaphragm. Body Bonnet Medium Port PTF Model Flow* scfm (dm3/s) Weight lb (kg) Aluminum Plastic Air, inert gases 1/4" R44-200-RNKA 10 (4.7) 0.23 (0.11) Brass Plastic Air, CO2, inert gases 1/4" R44-221-RNKA 10 (4.7) 0.45 (0.21) Zinc Plastic Air, inert gases 1/8" R44-122-RNKA 10 (4.7) 0.31 (0.14) Brass Brass Air, CO2, inert gases 1/4" R44-233-RNKA 10 (4.7) 0.54 (0.25) Port Model Flow * scfm dm3/s() Weight lb (kg) 1/4" R83-200-RNLA 11 (5.2) 1.3 (0.59) Alternative Models - R83 R83-200-H NHA Diaphragm Substitute Relieving R Non relieving N Outlet Pres Adj Ranges † Substitute 2 to 50 psig (0.1 to 3.5 bar) E 5 to 125 psig (0.3 to 8.5 bar) L 10 to 175 psig (0.7 to 12 bar) N R44 Fluid: Compressed air, carbon dioxide, inert gases, neutral gases NOTE: Contact technical support for use with other media. Maximum pressure: 250 psig (17 bar) Operating temperature: -30° to 150°F (-34° to 66°C) * * Air supply must be dry enough to avoid ice formation at temperatures below 35°F (2°C). R83 Fluid: Air, argon, carbon dioxide, krypton, neon, nitrogen, and xenon. For use with other gases, including oxygen, consult technical support. Do not use the R83 regulator in beverage dispensing applications. Other regulators (R81 for soft drink, R82 for beer, R84 for carbonators) are available for use in dispensing systems. Maximum pressure: 3000 psig (207 bar) Operating temperature: -30° to 140°F (-34° to 60°C) * * Fluid must be dry enough to avoid ice formation at temperatures below 35°F (2°C). Materials R44 Body and bonnet R44-100/-200: Aluminum body; acetal plastic bonnet R44-121/-221: Brass body; acetal plastic bonnet R44-122/-222: Zinc body; acetal plastic bonnet R44-133/-233: Brass body; brass bonnet Valve: Brass/nitrile Valve seat: Acetal Elastomers: Nitrile R83 Body: Brass Bonnet: Zinc Cartridge valve: PTFE, brass, stainless steel Diaphragm: Acetal and nitrile Seals: Nitrile Technical data UL Listed Regulators for Industrial Service Regulators for use with compressed air and inert gases