Pneumatic & Fluid Control Catalog - z7424CT

13 - Stainless Steel Products

Issue link: https://onenorgren.uberflip.com/i/561443

Contents of this Issue

Navigation

Page 12 of 12

AIR PREPARATION PRODUCTS 4 APP-111 For further information www.norgren.com Stainless steel Filter/regulator IFR IFR3 - 1/4" Filter/regulator combination IFR4 - 1/2" Filter/regulator combination Part number Outlet pressure psi (bar) Drain type Port size NPT Seat/seal materials Gauge YR2ACA1H1BS040 7 to 145 (0.5 to 10) Manual 1/4 NBR 304/316SS dry, bar & psi YR2ACA3H1BS040 7 to 145 (0.5 to 10) Manual 1/2 NBR 304/316SS dry, bar & psi Model IFR (instrument filter regulator) Filter / regulator combination High flow capability Max inlet pressure 20 bar (290 psi) Maintains set pressure with increasing flow Fully venting Reliable and long life, ideal for one time installation Media: Air Filter with manual drain: 40 - 50 μm - stainless steel Relief port: 2 mm drilled hole Maximum inlet pressure: 20 bar (290 psi) Outlet pressure range: 0.5 - 10 bar (7 - 145 psi) Temperature ratings: Standard = Media (min/max -30/90 ºC (-22/194 ºF)) Ambient (min/max -30/90 ºC (-22/194 ºF)) Process connections: IFR3 - 1/4" NPT IFR4 - 1/2" NPT Weight: IFR3 - 1.8 kg IFR4 - 2.2 kg ATEX classification: Exc - complies with EN13463 for non-electrical equipment Materials Valve body - stainless steel - 316L Top & bottom covers - stainless steel - 316 Valve trim materials - 316L stainless steel O-rings & seals - nitrile (NBR) Diaphragm - nitrile (NBR) Seat & adjustment springs - stainless steel Technical data M8 ADJUSTMENT SCREW (13 A/F) 39 39 39 2 82.5 98.3 204 105.4 82.5 105 13 9 9 5 ø 2.0 RELEIF VENT 4 OFF ø 6.4 MOUNTING HOLES OUTLET GAUGE MANUAL DRAIN SCREW 1/8" NPT GAUGE PORT INLET 0-20 BAR 56.0 ACROSS FLATS M8 ADJUSTMENT SCREW (13 A/F) 39 109 13 9 9 5 MANUAL DRAIN SCREW 1/8" NPT GAUGE PORT 70.0 ACROSS FLATS 39 39 38 ø 2.0 RELEIF VENT 4 OFF ø 6.4 MOUNTING HOLES INLET 0-20 BAR 2 101.3 210 108.4 85.5 85.5 GAUGE Models *1) Outlet pressure can be adjusted to pressures in excess of, and less than, those specified. Do not use these units to control pressures ourtside of the specified ranges. *2) Typical flow with 10 bar inlet pressure, 6.3 bar set pressure and a 1 bar drop from set.

Articles in this issue

Links on this page

Archives of this issue

view archives of Pneumatic & Fluid Control Catalog - z7424CT - 13 - Stainless Steel Products