Pneumatic & Fluid Control Catalog - z7424CT

10 - Pressure & Instrument Regulators

Issue link: https://onenorgren.uberflip.com/i/561434

Contents of this Issue

Navigation

Page 0 of 9

4 AIR PREPARATION PRODUCTS APP-74 For further information www.norgren.com Kit includes diaphragm, valve, valve spring, and o-rings. Service Kits Type Part number Relieving, 1/4" and 3/8" ports 529-03 Relieving, 1/2" ports 535-03 Fluid: Compressed air, neutral gases NOTE: Contact technical support for use with other media. Maximum pressure: 400 psig (28 bar) Operating temperature*: -30° to 175°F (-34° to 80°C) *Air supply must be dry enough to avoid ice formation at temperatures below 35°F (2°C) Gauge ports 1/8" PTF with PTF main ports Rc1/8 with ISO G main ports Materials Body: zinc Bonnet: aluminum Valve: brass and nitrile Valve seat: brass, or zinc Elastomers: nitrile Bottom plug: 1/4" and 3/8" ports: brass 1/2" Ports: nylon Technical data 11-002 Pressure Regulator 1/4", 3/8", and 1/2", 3/4, and 1 ports Ordering information Models listed have T-bar adjustment, relieving diaphragm. PTF models are 5 to 125 psig (0.3 to 8.5 bar) outlet pressure adjustment range*. For alternative models please contact the factory. * Outlet pressure can be adjusted to pressures in excess of, and less than, those specified. Do not use these units to control pressures outside of the specified ranges. † Typical flow with 150 psig (10 bar) inlet pressure, 90 psig (6.3 bar) set pressure and 15 psig (1 bar) droop from set. ** Typical flow with 100 psig (7 bar) inlet pressure, 60 psig (4 bar) set pressure and 15 psig (1 bar) droop from set. ISO Symbols Port Size Model Number Model Number w/panel mount option Flow scfm (dm3/s) Weight lbs (kg) 1/4" 11-002-013 11-002-013-2A 60 (30)† 1.9 (0.86) 3/8" 11-002-037 11-002-037-2A 60 (30)† 1.9 (0.86) 1/2" 11-002-061 11-002-061-2A 200 (100)† 2.0 (0.91) Large diaphragm provides accurate and quick response to changing flow demands and line pressure Floating valve pin provides positive valve seating Balanced valve minimizes effect of variations in inlet pressure on outlet pressure Standard relieving models allow reduction of downstream pressure when the system is dead-ended

Articles in this issue

Links on this page

Archives of this issue

view archives of Pneumatic & Fluid Control Catalog - z7424CT - 10 - Pressure & Instrument Regulators