Pneumatic & Fluid Control Catalog - z7424CT

01 - Fittings

Issue link: http://onenorgren.uberflip.com/i/555299

Contents of this Issue

Navigation

Page 0 of 37

5 FITTINGS For further information www.norgren.com FIT-02 Specifications Fluid: Compressed air, nitrogen, inert and non-combustible gases compatible with materials of construction. Note: For other types of fluids or compressed gases, please consult factory. Working pressure: 29.5" Hg vacuum to 260 psig (750 mm Hg to 18 bar) Note: Flow Control working pressures: 5 to 150 psig (.3 to 10 bar) Working temperature: 0°F to 175°F (-20°C to 80°C) Request FPM option on selected part numbers for extended temperature range : 0°F to 350°F (-20°C to 180°C) Materials Body, swivel fitting and collet: Nickel plated brass O-ring: Silicone free Nitrile Sealing washer (parallel male threads): silicone free nitrile Tubing: Nylon 11 or 12, Polyurethane (95 durometer or above) and LDPE (Low Density Polyethylene). Note: Lower durometer polyurethane may be used, however, an internal tube support is required to prevent internal collapse of the tube wall. Thread Sealant: Precote 5 thread sealant is factory applied to the circumference of tapered male threads. Pneufit ® push-in fittings Inch Ø 1/8" to 1/2" O/D tube For simple and quick assembly of pneumatic circuits. Positive tube connection. Wide range of types available. Reliable and corrosion resistant. Tube stop 'O'-ring Collet Body Thread sealant Internal hexagon Dimensions Inches (mm) Recommended tightening torques T V A ØS Tube O.D.'s and Tube Tolerances A O.D. Tube T S Tubing Stop V 1/8" 0.09 (2.3) 0.53 (13.5) 0.26 (6.5) 5/32" (4) 0.11 (2.8) 0.55 (14.0) 0.30 (7.5) 3/16" 0.13 (3.4) 0.59 (15.1) 0.38 (9.7) 1/4" 0.17 (4.4) 0.61 (15.5) 0.42 (10.7) 5/16" (8) 0.24 (6.0) 0.65 (16.5) 0.51 (13.0) 3/8" 0.30 (7.6) 0.83 (21.0) 0.59 (15.1) 1/2" 0.38 (9.6) 0.96 (24.3) 0.71 (18.1) Thread Tightening torque ft lbs (N*m) 10-32 UNF .75 – 1 (1-1.4) 1/8" NPT 5.0 – 6.5 (6.9 – 8.8) 1/4" NPT 8.7 – 10.1 (11.8 – 13.7) 3/8" NPT 15.9 – 17.3 (21.6 – 23.5) 1/2" NPT 20.2 – 21.7 (27.4 – 29.4) O.D. Tube Tolerances Tube O.D. Nylon Polyurethane 1/8" to 1/2" +0.002" (+0.05 mm) ±0.005" (3 mm to 14 mm) -0.004" (-0.10 mm) (±0.12 mm)

Articles in this issue

Links on this page

Archives of this issue

view archives of Pneumatic & Fluid Control Catalog - z7424CT - 01 - Fittings