Pneumatic & Fluid Control Catalog - z7424CT

01 - IMI Norgren Valve Manifolds

Issue link: https://onenorgren.uberflip.com/i/553520

Contents of this Issue

Navigation

Page 100 of 135

2 VALVES VAL-102 For further information www.norgren.com Multipole or individually wired for installation flexibility Interchangeable Fieldbus modules: Profibus-DP, DeviceNet and CANopen Compact and lightweight Quick disconnect base (Pneumapole) High flow from 10 mm valve width To configure and order a Valve Manifold visit - norgren.com Medium: Compressed air, 40 µm filtered, lubricated and non-lubricated Operation: Spool valve indirectly actuated Port sizes: Ø 1/8", 1/4", 5/32", 3, 4, and 6 mm Push-in fittings Tube types: Nylon 11 or 12, polyurethane* and other plasticized or unplasticised tubing conforming to the tolerances specified in DIN 73378. NFE 49-101. ISO/WD 16026 Operating pressure: Maximum 116 psig (8 bar) Flow: Function l/min Cv Kv 5/2 port 430 0.44 0.36 1 » 2 & 4 5/2 ports 400 0.41 0.34 2 » 3 & 4 » 5 3/2 and 5/3 350 0.36 0.29 Insulation protection: Individually wired: IP40 Multipole & Fieldbus: IP65 Ambient temperature: 23°F to 122°F (-5°C to 50°C) Air supply must be dry enough to avoid ice formation at temperatures below 36°F (2°C). Materials: Body, end plates: engineered PPA co-polymer Spool: aluminum Seals: NBR Technical features Valve manifolds, VM10 series Valve slices 2 x 3/2, 5/2 and 5/3 with integral push-in fittings Ø 1/8", 1/4", 5/32", 3, 4, and 6 mm

Articles in this issue

Links on this page

Archives of this issue

view archives of Pneumatic & Fluid Control Catalog - z7424CT - 01 - IMI Norgren Valve Manifolds