Datasheets

52 Series NPB datasheet

Norgren Featured Datasheets

Issue link: https://onenorgren.uberflip.com/i/1111552

Contents of this Issue

Navigation

Page 0 of 7

Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. © 2019 Norgren Ltd 3/19 Technical features > For miniature pneumatic and fluid control applications > Consistently sharp, single- barb design which provides a tight grip and reliable seal > Larger thru-hole for a maximized flow path > Corrosion resistant > Compact design 52 Series Barb Fittings—Nickel Plated Brass Tube range: 1/16" to 3/8" ID Tube Dimensions Male Adapter 524171610 10-32 1/16 0.571 5/16 0.416 524175610 10-32 5/64 0.571 5/16 0.416 524173210 10-32 3/32 0.574 5/16 0.419 524170110 10-32 1/8 0.665 5/16 0.510 524175310 10-32 5/32 0.689 5/16 0.534 524177010 10-32 0.170 0.689 5/16 0.534 524170310 10-32 3/16 0.723 5/16 0.568 524170410 10-32 1/4 0.846 5/16 0.691 5242P1610 10-32 1/16 0.571 1/4 0.416 5242P5610 10-32 5/64 0.571 1/4 0.416 5242P3210 10-32 3/32 0.574 1/4 0.419 5242P0110 10-32 1/8 0.665 1/4 0.510 5242P7010 10-32 0.170 0.689 1/4 0.534 524171614 1/4-28 1/16 0.666 3/8 0.416 524173214 1/4-28 3/32 0.669 3/8 0.419 524170114 1/4-28 1/8 0.760 3/8 0.510 524177014 1/4-28 0.170 0.784 3/8 0.534 524170314 1/4-28 3/16 0.818 3/8 0.568 524170414 1/4-28 1/4 0.941 3/8 0.691 524171616 1/16 1/16 0.611 5/16 0.346 524173216 1/16 3/32 0.614 5/16 0.349 524170116 1/16 1/8 0.705 5/16 0.440 524177016 1/16 0.170 0.729 5/16 0.464 524170316 1/16 3/16 0.763 5/16 0.498 Part Number 1 (Thread) 2 (Barb) A B Hex C D Fluid: Compressed Air, Gases, and Liquids (compatible with o-ring material) Working Pressure: Defined by working pressure of specified polyurethane tubing Working Temperature: -20° to 160°F (-28° to 71°C) Materials: Body: Nickel Plated Brass O-Rings: Buna-N (special material options available) Barb Sizes: 1/16, 5/64, 3/32, 1/8, 5/32, .170, 3/16, 1/4, 5/16, 3/8 Thread Sizes: 1/4-28, 1/16, 1/8, 1/4, 3/8, 1/2, M3, M5, M6 Recommended Tubing: Polyurethane 85A Durometer Note: Clamps are recommended for applications over 80 psig which also involve heat or vibration. Note: 10-32 and 1/4-28 thread fittings include an o-ring seal Male Adapter

Articles in this issue

Archives of this issue

view archives of Datasheets - 52 Series NPB datasheet